I have read about using ATF/acetone at a 50/50 mix but I just need to talk more about it first. Ya know 1:1 might cause the bolt to lean seize or it might make too much smoke if I have to heat it. And what ATF should I use? Can I use Ford ATF on a Cummins bolt? I modified the muffler on my Dodge Cummins on a big rock, surely I should run a richer mixture. Can I substitute MEK if I don't have any acetone?
Well, type f seems to be the best, but mercon/dexron seems about the same, just not as stinky... and by all means ignore the warning labels about mixing brands and put as much FORD product on yer dodge as possible, it can only help.
Having modified the Muf on yer little dodge, you should absolutely run 60/40 mix anything less will not smoke nearly enough to make it appear to be a dodge.
And as far as methyl ethel Death, in all seriousness, its use should be avoided for all and every use, its some nasty stuff. Acetone is bad enough, and the trans fluid is pretty nasty too, but the MEK takes the cake. Besides I think acetone is cheaper. I haven't tried denatured alcohol.