the all aussie dribble thread!

Wesspur
Shop deals on ebay
Rugged made
shop deals on amazon
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
scallywag said:
View attachment 388818
As soon as this Christmas crap is over this will be me!....kickin back here at my favourite fishin spot!:havingarest:
Click to expand...

That looks like the plan,,,,, I wish I wish I wish but alas I am still on the job till tomorrow arvy. Cutting 150x150 x 3.6 centre heart posts today out of iron bark and tallow wood, fall down is 100x90x3.0 stays and 100x100x1.8 posts, what a chore.
Living the dream I suppose.
 
ausneil 1 said:
That looks like the plan,,,,, I wish I wish I wish but alas I am still on the job till tomorrow arvy. Cutting 150x150 x 3.6 centre heart posts today out of iron bark and tallow wood, fall down is 100x90x3.0 stays and 100x100x1.8 posts, what a chore.
Living the dream I suppose.
Click to expand...
you enjoy it Neil, you love the work
 
460cixy said:
That's why I stay here over Christmas all the wankers piss off then then they start s
Drifting back I piss off out west for a bit
Click to expand...

you hanging around for the summernats knobs matt?

peter92 said:
they say pics says a 1000 words








can i put on a bigger cc jug and piston but run the same carby setup
Click to expand...

sh1t hey peter:( it was working ok the other day wasnt it? run it at about 30:1 and she'll have plenty of lube.

gmax said:
Peter that cylinder looks like it will clean up, any deep scoring in it?, you may just need a new piston Meteor would be my choice.
Click to expand...

yeah i would give that a go peter. clean her up with some hydrochloric acid wash it out and a bit of scotch bite. fresh piston and away u go. i am sure you'll find a piston no probs for it. just shipping this time of year will suck.
 
VinceGU05 said:
you hanging around for the summernats knobs matt?



sh1t hey peter:9 it was working ok the other day wasnt it? run it at about 30:1 and she'll have plenty of lub.



yeah i would give that a go peter. clean her up with some hydrochloric acid wash it out and a bit of scotch bite. fresh piston and away u go. i am sure you'll find a piston no probs for it. just shipping this time of year will suck.
Click to expand...
ive only got a wheel cylinder honer here to clean it up with so contacted MCW to see if he wants to do it, if the cylinder can be saved thats great, i dont have the gear to do the job myself so have to get some one else to do it, bitty matt,s in sa though
And to answer your other question, long story short, i put cord in the cylinder and piston was down too far, i broke the ring and piston scored the barrel
Regards Peter
 
VinceGU05 said:
you hanging around for the summernats knobs matt?



sh1t hey peter:( it was working ok the other day wasnt it? run it at about 30:1 and she'll have plenty of lube.



yeah i would give that a go peter. clean her up with some hydrochloric acid wash it out and a bit of scotch bite. fresh piston and away u go. i am sure you'll find a piston no probs for it. just shipping this time of year will suck.
Click to expand...
yeah im hoping it will, do i take out all the scratches with the honing tool
 
peter92 said:
ive only got a wheel cylinder honer here to clean it up with so contacted MCW to see if he wants to do it, if the cylinder can be saved thats great, i dont have the gear to do the job myself so have to get some one else to do it, bitty matt,s in sa though
And to answer your other question, long story short, i put cord in the cylinder and piston was down too far, i broke the ring and piston scored the barrel
Regards Peter
Click to expand...
i would love to do it for you but just as far away at matt.

i have used a rattle gun for the clutch, every time it gets it off without needing to put rope on the plug hole. i also got the right tool "piston stop" for when doing it up. i like to double check with hand torqueing it.
 
Ladies and gentlemen, just in at the servo and what did I see,,,,, a BSA bantam 125 with all the chrome and stuff.
Anyway I has a look at it close and the owner come and started talking about it,,, something looked different about it and I couldn't see any BSA markings anywhere.
The guy said its not a BSA at all, its a Chinese copy of a BSA Bantam, and some of the chrome was actually chrome plastic.
He said he paid $3000.00 for it on road and insured and come up the highway from Sydney at 80kmh, he said it will do 90 down hill.
Electric start 125 Chinese BSA copy, what's next ??????
 
ausneil 1 said:
Ladies and gentlemen, just in at the servo and what did I see,,,,, a BSA bantam 125 with all the chrome and stuff.
Anyway I has a look at it close and the owner come and started talking about it,,, something looked different about it and I couldn't see any BSA markings anywhere.
The guy said its not a BSA at all, its a Chinese copy of a BSA Bantam, and some of the chrome was actually chrome plastic.
He said he paid $3000.00 for it on road and insured and come up the highway from Sydney at 80kmh, he said it will do 90 down hill.
Electric start 125 Chinese BSA copy, what's next ??????
Click to expand...
yeah i had one of those as a kid, the old 3 speed 1 down 2 up, great bikes, mine was BSA
 

Similar threads

svk
Sold Craftsman 3.7 project
Replies
8
Views
636
svk
svk
H
Ultrasonic cleaner experience
2 3 4
Replies
65
Views
5K
sean donato
sean donato
F
Bucking spikes For Husqvarna 450
Replies
8
Views
1K
Firewood
F
Hipastore
Limited Opportunity! Hipa want to invite 30 people try our chainsaw chain, for free
Replies
2
Views
2K
Hipastore
Hipastore
Glad2BNico
Hello from Wisconsin
Replies
1
Views
229
stihlaficionado
stihlaficionado

Latest posts

Back
Top