Work Saw Collector
GTG Coffee Maker
I know, I know, pick me. LOL
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
When you gonna change your handles to "twerk saw collector"?
warjohn
Addicted to ArboristSite
Second day in a row it was dry enough to cut wood. Got a trailer load each day and at least another half trailer load cut. The homeowner and a freind of his helped out. His buddy has a 257 I let him try out my 2153 He didn't want to give it back. I plan to go back for more on Monday. If your interested Kenneth let me know.
WKEND LUMBERJAK
Addicted to ArboristSite
Second day in a row it was dry enough to cut wood. Got a trailer load each day and at least another half trailer load cut. The homeowner and a freind of his helped out. His buddy has a 257 I let him try out my 2153 He didn't want to give it back. I plan to go back for more on Monday. If your interested Kenneth let me know.
I believe I can let me know when morning works better for me. John swift and I are getting together Tuesday . If its all right can I invite him?
WKEND LUMBERJAK
Addicted to ArboristSite
Give me a call.
Hedgerow
HACK
We got 2 cord cut and split today...
Horrible conditions..
Damn near got stuck 2 times, and made a hell of a mess...
We need a freeze..
Horrible conditions..
Damn near got stuck 2 times, and made a hell of a mess...
We need a freeze..
sunfish
Fish Head
Kind of odd the ground isn't froze up by now. Muddy around here too...
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Same here I have grooves wore where I put wood in the basement!
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
I split a short box full o pine.... The basement smells wonderful now!
Hedgerow
HACK
Use those prickly pears for traction Don!!
WKEND LUMBERJAK
Addicted to ArboristSite
It settled some today should be froze tomorrow early. Monday for sure.
Locust Cutter
Sawing for Sanity
Evening all! Dad and I are going out in the am to retrieve about 3/4 of a cord of Hedge that we partially bucked a few weeks ago on a friend's ranch. There's a lot of dead Oak and Hedge out there that I want to tie into. We'll see. In other news I dropped a dead piss elm in the yard that was about 35" at the trunk with the 9010. It is pig-rich which I'll fix but otherwise pulled pretty good. I'm going to lean it out a bit as I could barely get it to 4-stroke in the cut while leaning on it. Then it should be ready to rock in some big Hedge that I have planned for it soon. God willing my daughter (cutting buddy) will be coming out again but we'll see based on the temps.
Morning midlanders.
Have not heard from Jim in a while.
Have not heard from Jim in a while.
Work Saw Collector
GTG Coffee Maker
Hope he is doing well.
Hedgerow
HACK
His internet still down?
Work Saw Collector
GTG Coffee Maker
That was the last I seen posted.
Hedgerow
HACK
Jim just needs a new I-phone, and to heck with the computer...
Work Saw Collector
GTG Coffee Maker
Work Saw Collector
GTG Coffee Maker
The Road Hammers.
