ALOT of older guys dig looking at the old saws.........
Several have brought saws to us just so they can seen and be enjoyed
And not rot in a barn
I guess I am an "older" guy now...
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
I guess I am an "older" guy now...
Anybody have a first and last name, and a town? Profile page says SE MO...
Will a 52mm piston for a MS460 work in a MS650? All I can find is 54mm P&C kits.
The cylinder in this 650 is near mint but the piston is shot.
The cylinder in this 650 is near mint but the piston is shot.
cobey
Addicted to ArboristSite
Alot late 50's to 80's. Older than us Thomas
awol
ArboristSite Guru
A piston from the 064 is the only 52mm Stihl that has a chance of working in the ms650. Same bore and stroke on both saws, and wider skirt than the 046.
Hedgerow
HACK
You'll have to measure, but possibly..
Skirts may be too short and crown too low..
Hedgerow
HACK
ropensaddle
Feel Lucky
Lol depends if the 395s out
awol
ArboristSite Guru
I think the ms650 is only a 660 with a smaller, 52mm jug fitted. Same case/crank/timing numbers. Someday I'll take one apart and find out!
Homelite410
Hack with a CNC Mill
Whay would u want a 660 or 650 when you can have a real saw......
awol
ArboristSite Guru
.......like an 064!
Homelite410
Hack with a CNC Mill
ropensaddle
Feel Lucky
Rotflmao don't know too many here no more it seems ss r value everyone left
Prolly the 066/660 top end kit is the best game in town.
Ordered it from Dave.
Went with the 56mm.
If some is good, then more is better and too much is just enuff.
Ordered it from Dave.
Went with the 56mm.
If some is good, then more is better and too much is just enuff.
Logging22
Les Brown
RR3 box 10044
Doniphan, Mo. 63955
From my spiral notebook that I keep track of parts and stamp money exchange.
Going to split the case on the 650. The rod big end bearing is shot. That's where all the trash in the crankcase came from. RATS!!!
cobey
Addicted to ArboristSite
Good guys here, we like to play with saws...... and stuff
cobey
Addicted to ArboristSite
I found out a hot rod buddy from KCK died.........
R.I.p Kris......... I hope he made peace with God....... sad deal
R.I.p Kris......... I hope he made peace with God....... sad deal
cobey
Addicted to ArboristSite
No fun....
Homelite410
Hack with a CNC Mill
Morning fellers!
Morning midlanders!
Really stepped in it on the MS650. Now will have lots more parts and labor in him than planned on.
Really stepped in it on the MS650. Now will have lots more parts and labor in him than planned on.
