Hedgerow
HACK
Levi's team won out the first day but lost in the championship round ..
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Crank out of the MS650. Roller cage looks strange.
Waiting on a crank from Hong Kong.
I plan on polishing the bearing surface down for less of a force fit as I found the original excessive.
Waiting on a crank from Hong Kong.
I plan on polishing the bearing surface down for less of a force fit as I found the original excessive.
cuttinties
ArboristSite Guru
Polished metal holds heat. I'd stick with a finer texture.
Homelite410
Hack with a CNC Mill
Afternoon all!
Afternoon everybody. Rain gauge at work showed an inch and a half from last night. Haven't seen anything out of its banks yet.
Was going to do some power washing around the house yesterday. Drug the power washer around front and found the hose had broken off of the wand assembly. Nuts. Took it apart and went to the local hardware store to see if they might have a replacement piece. No joy there. A replacement hand assembly only, not including the wand part, was $43. Stopped over at TSC and found a complete hand assembly and wand, that happened to fit my tip assembly on clearence for $24. Got it home and installed only to find the pressure hose had split In the middle of the hose. Nuts again. Now I've got to get a new hose, which is $80 for a 50 foot hose. Can't complain too much though. Pressure washer was given to me about 5 years ago.
Was going to do some power washing around the house yesterday. Drug the power washer around front and found the hose had broken off of the wand assembly. Nuts. Took it apart and went to the local hardware store to see if they might have a replacement piece. No joy there. A replacement hand assembly only, not including the wand part, was $43. Stopped over at TSC and found a complete hand assembly and wand, that happened to fit my tip assembly on clearence for $24. Got it home and installed only to find the pressure hose had split In the middle of the hose. Nuts again. Now I've got to get a new hose, which is $80 for a 50 foot hose. Can't complain too much though. Pressure washer was given to me about 5 years ago.
It was sunny and dry enuff today to get the yard mowed!!!
Not passing up any opportunity as wet as it is.
Not passing up any opportunity as wet as it is.
Homelite410
Hack with a CNC Mill
Did you make any dirt donuts Carl?
Nope. But the mower needs wider tires as it tends to sink in soft dirt.
99 cent evilbay purchase.
Seller listed them by the Remy part number. I asked him what pitch and guage they were. He sent me a pic of them laying next to a folding rule.
He could have gotten more if he knew how to run a dial caliper.
7/16" pitch x .058" guage. Just what I need to fix that chain on the big Wards. Right Workshop?
Seller listed them by the Remy part number. I asked him what pitch and guage they were. He sent me a pic of them laying next to a folding rule.
He could have gotten more if he knew how to run a dial caliper.
7/16" pitch x .058" guage. Just what I need to fix that chain on the big Wards. Right Workshop?
Seems someone spliced in a length backwards.
Kenneth: the J-Red 670 rocks!
Kick Stihl arse.
One of those times a simple overhaul comes together right from the get go.
Kick Stihl arse.
One of those times a simple overhaul comes together right from the get go.
WKEND LUMBERJAK
Addicted to ArboristSite
Carl I like those red saws. much easier to work on than what you been tackling.
I knew I should have just rolled that chain back till that was hidden, and not said a word.
Homelite410
Hack with a CNC Mill
Red saws = sexxy
You need to lower your blades a notch or two....
Raining here again and more on the way. Fantastic lightning show about 30 minutes ago.
One side benefit with all the rain is the skeeters. They carry ruck sacks and AK47s.
I knew I should have just rolled that chain back till that was hidden, and not said a word.
When I got that 5.0 Wards from Thomas1 I mounted a 20" on him, cut two cookies, drained it and mounted the roller nose bar for show. Don't remember where I got the chain.[emoji57]
cobey
Addicted to ArboristSite
I mowed an acre of mud, fixed a saw, trimmed a tree,weedeated, and worked 8 at work.
I made a place for the goat to go out of the mud.
Oh and planted more beats
I made a place for the goat to go out of the mud.
Oh and planted more beats
cobey
Addicted to ArboristSite
And put a belt on the mower......
WKEND LUMBERJAK
Addicted to ArboristSite
Morning fellas. Tried mowing last night. Still to wet .
