Freebies!

[lewis16]

For years I have wanted to be told I suck. Today I think is that day.

All free, the 64 and bar but no chain, and the ms200t no bar and chain. The 200t had a new carb and is getting its running gear and bar and chain tomorrow and the 064 is getting a clutch and running gear too.

 

[computeruser]

Dang. Well done!

 

[SEAM]

You will really like that 064!!
Congrats!

 

[lewis16]

Yeah just gotta get a bar and chain now. I have a 461 with a 25 inch b/c. What is the biggest bar and chain I can get for it? I've heard 36 but I want to be able to take down big timber with it, 32?

Sent from my D6603 using Tapatalk

 

[wde_1978]

For years I have wanted to be told I suck. Today I think is that day.

All free, 64 , ... 200t ...

Well folks seem reluctant to do You the honor so allow me - YOU SUCK !

I wouldn't mind a freebie 064 myself , paired up with a MS200t even more so.

 

[lewis16]

Doing well now. Since I joined this site I owned no saws. Now I own a 009, ms200t, ms260, ms461 and an 064. Happy today.

Sent from my D6603 using Tapatalk

 

[kz1000]

YOU SUCK! YOU SUCK! YOU SUCK! YOU SUCK AND YOU SUCK!​

 

[lewis16]

Ehehehehe

Sent from my D6603 using Tapatalk

 

[wde_1978]

Doing well now. Since I joined this site I owned no saws. Now I own a 009, ms200t, ms260, ms461 and an 064. Happy today.

STIHLhead

Seriously though , nice lineup You have - only thing missing is a monster Stihl saw , 088/MS880 or 090.

 

[Bluefish]

Dude, you suck! Good score Man! Russ

 

[lewis16]

The sad thing is, I really want a husky. Been trying to get a 390xp or a 50cc xp saw for ages now but haven't been able to find one!

Sent from my D6603 using Tapatalk

 

[computeruser]

Yeah just gotta get a bar and chain now. I have a 461 with a 25 inch b/c. What is the biggest bar and chain I can get for it? I've heard 36 but I want to be able to take down big timber with it, 32?

Sent from my D6603 using Tapatalk

Depends how much of a hurry you are in. I always enjoyed a strong 066 with 28" bar, full comp, and an 8t rim. So you should be good at 32" with a 7t rim, I should think.

Depending on what you are cutting, you may wish to upgrade to the higher-output bar oiler if one exists. I am pretty sure they have one for this guy, as they do for the 066, maybe even the same one? 32-36" bar can carry a fair bit of oil, and might require it, depending on what you're cutting.

 

[lewis16]

Might stick a 30 on it and then put a smaller bar on my 461, 20" perhaps

Sent from my D6603 using Tapatalk

 

[wde_1978]

The sad thing is, I really want a husky. Been trying to get a 390xp or a 50cc xp saw for ages now but haven't been able to find one!

Sent from my D6603 using Tapatalk

I'd like a Husqvarna 3120 , although I really wouldn't know what to do with it as I have trouble finding wood worthy of my PS-7900!

 

[lewis16]

That dolmar is best in its class so I hear. They don't sell orange ones over here, only makita ones. They don't have the HD air filter available either

Sent from my D6603 using Tapatalk

 

[PA Dan]

I run a 28" ES Light bar on mine and really like it. I have a 32" Oregon and it ran fine with that one and .404 Square ground chain! Oh and one more thing.....YOU REALLY SUCK!

 

[Definitive Dave]

YOU SUCK!!!!!

20" seems too small for a 461, maybe 25" and a 32" for the big fella'
DDave

 

[lewis16]

Can't seem to find a supplier of oregon that sells a 32" bar and chain. I live in the UK I wouldn't have thought I'd have a problem

Sent from my D6603 using Tapatalk

 

[lewis16]

I have a 25 on my 461, I had a 20" on my old 460 and that shifted some chip.

Sent from my D6603 using Tapatalk

 

[atv1965]

My 660 wears a 32" bar most of the time, but I do have the high output oiled on it. With a 32" bar you can handily drop 5' trees, and yes you suck!