What diameter file do I need for 7/16" chipper?
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
cobey
Addicted to ArboristSite
I hit something in a tree we went to get today,
The little roller guide works well once you get your teeth
To its angles........ still got to set the rakers
I'm happy to see you all this weekend
I hope to get good with the grandberg also
The little roller guide works well once you get your teeth
To its angles........ still got to set the rakers
I'm happy to see you all this weekend
I hope to get good with the grandberg also
WKEND LUMBERJAK
Addicted to ArboristSite
I would the same as a 3/8 would work just fine Carl. I sharpened the chain on the Mono the same as i would a 3/8". I used my chain Grinder.
I thought the wheel on my Nick The Grinder is too thin for 7/16".
Did I mention I hate to hand file chain?
Chains get sharpened once around here. Then it's out the door...........
Hedgerow
HACK
1/4" would get the job done, but the next size up would be better.
sawnami
Addicted to ArboristSite
9/32"?
I have two saws with 9/16" chain as it turns out.......
I have two saws with 9/16" chain as it turns out.......
Morning midlanders!
Going back to bed.
Going back to bed.
cobey
Addicted to ArboristSite
Mornin all 
Got to head to ft Scott in a bit..........
Got to head to ft Scott in a bit..........
WKEND LUMBERJAK
Addicted to ArboristSite
Time to start getting some saws loaded
cobey
Addicted to ArboristSite
Chad tried to make this load yesterday
cobey
Addicted to ArboristSite
When are you coming down Kenneth?
Hedgerow
HACK
I gotta head into the plant today, but hope to escape before dark.
sawnami
Addicted to ArboristSite
Same here. Looks like I'm gonna have to start the culling process. I hate having them bounce around in the trailer so I need to figure a way to secure them.
The gentleman that I met last week that will be there filled his trailer with sawdust and set his saws in it with a tarp over them. The bad thing is his tarp came loose on the way last week and every orifice on every saw is filled with sawdust. He doesn't run them so it's not a big deal to him.
Sent from my SM-N910V
sunfish
Fish Head
Guys, I'm not goin to make Ft Scott. I was in Kansas City 4 days last weekend, St.Louis yesterday and have had company here for 10 days. I'm beat to death and can't get on the road again anytime soon.
Y'all have a good one & I'll try to catch the next GTG.
Y'all have a good one & I'll try to catch the next GTG.
Same here. Looks like I'm gonna have to start the culling process. I hate having them bounce around in the trailer so I need to figure a way to secure them.
The gentleman that I met last week that will be there filled his trailer with sawdust and set his saws in it with a tarp over them. The bad thing is his tarp came loose on the way last week and every orifice on every saw is filled with sawdust. He doesn't run them so it's not a big deal to him.
Sent from my SM-N910V
Hmmmmm. I think I'll hit an ATM and rent a trailer if that load will be on site!
Lots of big, yummy oldies in there!
Hedgerow
HACK
Stuffit spray foam..Same here. Looks like I'm gonna have to start the culling process. I hate having them bounce around in the trailer so I need to figure a way to secure them.
The gentleman that I met last week that will be there filled his trailer with sawdust and set his saws in it with a tarp over them. The bad thing is his tarp came loose on the way last week and every orifice on every saw is filled with sawdust. He doesn't run them so it's not a big deal to him.
Sent from my SM-N910V
Lol..
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
You can cull the 750 and 2100 my way...[emoji8]
