Iowa Charity Cut -
- Thread starter sam-tip
- Start date
Help Support Arborist Forum:
Google maps is almost current.
WOW, that's a lot of wood there Doug!! Are you sure the elevator will go high enough to put that all into 1 pile?
Might have move it with all that!!!!
WOW, that's a lot of wood there Doug!! Are you sure the elevator will go high enough to put that all into 1 pile?
I bet we will find out! Never took the conveyor to the max height. Keep it low so it will not blow over in the wind. If not just move it a few feet to the side and keep adding to the side of the mountain.
I looked up the specs for the Rapat conveyor. It is 70 ft long and will raise to 40 degree angle. At max the pile can go up to 44'- 5" high. Almost twice the size as last year. My house is 29 ft to the chimney for comparison. The Genie lift will only go to 34ft high.
WKEND LUMBERJAK
Addicted to ArboristSite
1) Grimmy
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
Time's Standing Stihl
ArboristSite Operative
Put me on that list, unfortunately I won't be able to make it till after lunch. My oldest daughter has a track meet. Luckily we are only an hour away.
Hopefully I can swing up Friday night and grill out with everyone
Sent from my SM-G900R4 using Tapatalk
Hopefully I can swing up Friday night and grill out with everyone
Sent from my SM-G900R4 using Tapatalk
Will put you down for afternoon shift. I think last year we worked until 9 PM. I know it was getting dark when I called it quits.
Time's Standing Stihl
ArboristSite Operative
Thanks Doug, I'll see if I can bring my father along to help pick up the slack. Seems that Marcy's lunch always tends to slow us down in the afternoon!
Sent from my SM-G900R4 using Tapatalk
Sent from my SM-G900R4 using Tapatalk
You can copy, paste and add your name you know.
Like usual though, I'll pick up your slack!
1) Grimmy
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
8)Time's Standing Stihl
Michigan Escapee
ArboristSite Operative
I'll probably be by. Can't find an address though. Should I just ask the waukee locals where the monstrous pile of wood is?
BPS
ArboristSite Member
Holy cow thats a lot of wood.
I'm gonna miss ya'll this year.
I moved last summer, too far to drive. Too expensive to fly.
Have fun.
I'm gonna miss ya'll this year.
I moved last summer, too far to drive. Too expensive to fly.
Have fun.
Homelite410
Hack with a CNC Mill
1) Grimmy
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
8)Time's Standing Stihl
9)Homelite410
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
8)Time's Standing Stihl
9)Homelite410
dave53223
ArboristSite Operative
10)dave53223
.030 raker depth is optimal
Pick me up in route Friday night?
Time's Standing Stihl
ArboristSite Operative
Did you ask Red if it was ok? Don't want my buddy mad at me.....again
Sent from my SM-G900R4 using Tapatalk
1) Grimmy
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
8)Time's Standing Stihl
9)Homelite410
10) Dave53223
11) nstueve + red
12) Ron and Jess (hopefully)
2) Woodburner2
3) srcarr52
4) AEMetalWerks
5) Mike Gott
6) Mark and Kamryn
7)Kenneth and Winston Miller
8)Time's Standing Stihl
9)Homelite410
10) Dave53223
11) nstueve + red
12) Ron and Jess (hopefully)
