Want to Buy Stihl S-10 rear handle parts

[Definitive Dave]

I found a great guy to do my S-10 custom restoration.
We are going to need a few bits and pieces.
The hardest to track down seems to be the clutch lever/linkage and ignition switch parts.
Cash or parts or OEM Tools, etc. to trade
thanks
Dave

 

[William Balaska]

Would a really nice concrete saw do the trick? I havery a whole saw that I've had on the back burner for two years. I have a hundred in it.

 

[scallywag]

Dave is your S 10 high handle or low handle ?

 

[Definitive Dave]

Would a really nice concrete saw do the trick? I havery a whole saw that I've had on the back burner for two years. I have a hundred in it.

I am not familiar enough to know for sure, the rear handle has some different pieces from the 08S which was popular for a long time as a stop handle with many attachments, I don't think a concrete saw would work but I might be wrong.
Tramp 295 is doing the work, perhaps he will chime in here.
Dave

 

[Definitive Dave]

Dave is your S 10 high handle or low handle ?

View attachment 503345

If it is the top handle we are talking about I believe it is higher than the one in the picture.
Randy said it had an unusual cylinder aluminum with a liner and then chrome plated, hopefully it cleans up well 47mm, if that helps.
Dave

 

[scallywag]

The hardest to track down seems to be the clutch lever/linkage

If these parts are referring to a chain brake?... I'm thinking it sounds more like a later version (Made in Brazil) 08s?

 

[Definitive Dave]

Wow my typo is huge
I need choke lever and linkage
Jeez what a doofus I am
CHOKE not clutch

 

[295 tramp]

The s-10 for Dave in question is a rear handle.
It has a cylinder I have never found on a stihl that has a iron or steel chromed liner.
IPL shows it in a cylinder and piston kit 1108 020 1202 and says its a corben.
the only one I found was different with the inpulse area.
The one I have here can possible be cleaned up using MMs
method.
But we still need a complete clutch assembly with the drum and bearing.
Also the choke rod and contact spring for the kill switch.
And the front handle plastic support that mounts on the handle and fastens to the side of the starter.
1108 series clutch parts and handle support are the same.
Choke rod and contact spring only from a rear handle s10.

 

[Definitive Dave]

I think the plastic support and clutch/sprocket stuff I have lined up now
The choke rod and contact spring are gonna be fun

 

[295 tramp]

10-4

 

[morningman]

Nos handle?

 

[Definitive Dave]

shoot me a price I think the existing handle has a little paint or something on it

 

[morningman]

15.00 plus the ride

 

[morningman]

Any idea what these fit Dave?

 

[Definitive Dave]

just a wild azz guess they look like some of the 08S mufflers, there seemed to be a ton of them and a few different variations used with specific attachments for that series saw.
I could be waaaay off though.
Shoot me a PM with details on how to get your paid on the handle and I will get it to you along with the shipping address, thanks man
Dave

 

[morningman]

Looking for anything else?

 

[Definitive Dave]

090G muffler - either style
S-10 rear handle choke rod and ignition spring
OEM 066 non-decomp jug in usable condition
075/076 mufflers in nice shape (3)
050/051/075/076 full wrap style clutch covers (2)
075/076 full wrap clutch side lower metal mount (2)
075/076 chain brake parts (I have a nice cover but somehow misplaced the bag with all the internal parts that I removed when I sent the cover for powder coating.
S-10 minty fanwheel
any other NOS bits you might have for a rear handle S-10 or an 076
Dave

 

[morningman]

Tell me on the cylinder ? Choke rod didn't have a part # on it any part #s on the brake parts?

 

[morningman]

Not sure if any parts inside this would help

 

[morningman]

050,051,075,076? I have some nos misc stuff