372xp
- Thread starter kallaste
- Start date
Help Support Arborist Forum:
MAG58
ArboristSite Guru
THALL10326
The Champ
Click on the Baileys logo at the top of this page. They seem to have a good price on that 372xp although you may have to wait abit to get it.
Might want to check out the Dolmar 7900. I ran a couple of them at a GTG a few weeks ago. 7900 feels similar in weight, I probably preferred its balance, and has much more torque. I have a modded 372 that runs pretty good, but for actual work, I would probably have gotten the 7900.
Hired Gun
ArboristSite Operative
Yes, look at Jonsered CS 2171 TURBO, it's the sister to Husqvarna 372xp
Eye candy Mag, EYE CANDY!!:camera:
SawTroll
Information Collector
Yes, look at Jonsered CS 2171 TURBO, it's the sister to Husqvarna 372xp
Yes, but it has "substantially" less power output, and the wrong handlebar angle.......
....but it is a beauty, made by Husky.....
Last edited:
SawTroll
Information Collector
LOL, I was just having some fun, they do in fact rate the 2171 at 5.3 hp, and the 372 at 5.4, but both are 3.9 kW..........
....it is possible, but I think it is just marketing.....:taped:
1kW = 1.34 bhp = 1.37 hp
Last edited:
MAG58
ArboristSite Guru
Last edited:
Hired Gun
ArboristSite Operative
Thanks Mag! I need some vitamin RED. My collection is deficient:hmm3grin2orange:
Why wait on the 372xp 70cc version when you can get the 372xpw 74.66cc version now at Baileys for a few bucks more. http://store.baileys-online.com/cgi-bin/baileys/5343?mv_session_id=WQzrw9dy&product_sku=HU 375W
MAG58
ArboristSite Guru
When I'm out cutting, I will take more photo, thinking of the one's needing more vitamin RED
Last edited:
Uwharrie
ArboristSite Operative
kallaste, Give us a call (336-672-1196) on a new 372XP (in stock). Thanks Tony
Mtnman4ever
ArboristSite Operative
Husky Has replaced the 372 with t 575 , it is a excellent saw . not was well known yet , I think Husky is slowly changing it's whole line . Huskies 570 is about the same as a 372 I think it is a 372 with a new name and slightly housing If you want a litle more power, a 385 . All are around the range you ar looking for , Josereds , are made by Husky in the same factorty for tha amtter . Take a close look at them and they are remarkably similar but Jonserd does not have the real big saws, no big deal as the parts ae interchangalbe and you can use the same bars and chains , but cost more . both are good saws . Though ido not se as man Jonsred dealers you vcan get them on the intenet . Make sure to get that last 2 bars amd afew extra ains . yep it cost more but it will save you a head ache in haveing to run out for a new bar or chain gt file an if you can eventaulldrop the130- 230 fora shar[enr. testit out on some junkchains and ten you are read to go ,:biggrinbounce2:
Try Baileys they hava always been good to I can have parts at my door in a ffew days . iamalwys working on soemthging .
goodluck
blis
Addicted to ArboristSite
The 575p is supposed to replace 372p, while 570 being consumer model....
SawTroll
Information Collector
Not at all, it is the same as the 575, but with a smaller bore.
The 570 is the replacement for the 365, and it is not a consumer model.
SawTroll
Information Collector
I suspect the the 74.66 is there for EPA reasons, and not for increased power.
There are indications that it is a bit heawier than the standard version.......
But the possibility for even more power is there after a modding someday if they decide to in the future and that dont have nothing to do with weight, its the cylinder and piston of 74.66cc's.
Throw the book crap specs in for heat Troll.
Throw the book crap specs in for heat Troll.
I'm not sure about the xpw but the regular 372xp does not meet EPA standards and I think they can only bring in a limited number of them to the US depending on how many EPA credits they have for units that exceed the standards.
372xpw
I dont quite understand the xpw thing, why the differant displacement than the 372 xp. can you get the saw in a half wrap handle with the 74cc displacement? Does the 5 ccs make that much difference?
I dont quite understand the xpw thing, why the differant displacement than the 372 xp. can you get the saw in a half wrap handle with the 74cc displacement? Does the 5 ccs make that much difference?
