Not in my situation. This is the firewood forum. You can find the logging forum elsewhere.This works good for moving logs. View attachment 545225
That might not fit down the ATV trail.This works good for moving logs. View attachment 545225
Y
Not in my situation. This is the firewood forum. You can find the logging forum elsewhere.
Anyway, to keep from dragging, you can load 8 footers on the bottom with little hanging off and put the linger ones on top to give more tail clearance.
Side posts drop so you can roll bigger ones. Will be adding a winch soon for side and end loading.
Ok.Uh.. firewood comes from logging. It's what I do for a living. The forum doesn't say, "firewood, just home jobbers though"
The ditch was the old property line now that the campground expanded I should just take my bush hog and start new skid trail.Uh.. firewood comes from logging. It's what I do for a living. The forum doesn't say, "firewood, just home jobbers though"
The skd trails make nice ATV trails or access roads if we run the dozer through. Usually make the skid trail 2 skidder wide so ~20ft.
How does the log-rites hookup to the ATV and is the hitch above center of axleMinimum impact, no drag marks, and no dirt to dull the saw chain. The trailer is much more useful of course for all sizes of firewood, and other things. Pretty flat where I am, terrain may dictate something different. The arch is Log-Rites Fetching arch with atv tow option, which includes the two speed hand winch w/friction brake. Last photo is a very handy/useful modification to capture the front end of a log, easily and quickly. Your right, not cheap. Great design/build, and worth the money.
View attachment 545317 View attachment 545318 View attachment 545319 View attachment 545320 View attachment 545321 View attachment 545322
I use an F-150 4x4 for the small and F-350 utility body 1 of my old welding rigs both with positive traction lockers from rock autoValley is right. Small equipment is fine but it takes a long time to get a big pile. I use the Steiner and small wagons for branches, fallen dead falls and pretty much anything that I would cut up with my buzz saw. I use my Kubota tractor and my bigger log wagons for the bigger stuff.
Not bad with only 2hp!View attachment 545646 Little so,but we get it done.
Just a guy, I made an arch to pull logs to the landing when it's wet in the bush. I also made 2 wagons to haul branches and smaller stuff. They work good and helps keep the bush clean. 16"x 24' cherry log.
View attachment 545307 View attachment 545308 View attachment 545309
View attachment 545646 Little so,but we get it done.
Enter your email address to join: