241c , 261c , 362c adapter for K/N filter

Shop deals on ebay
Treestuff
Rugged made
Advertise with us
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
huskihl said:
But since you're into posting different saws, different wood and different chains, I'll comply. All I had this time was 22" frozen beech. Pretty sure it's hard. Lol.

Just a regular woods port. Nothing fancy

Click to expand...

Yah , here’s a Hotsaws101 461R that’s tuned fat that wood give your 064 a run for its money — in the SAME wood ; using the SAME bar and chain ! The tree Is ash and it’s 18+” tapering smaller as I work my way up the tree ... work Saw with off the roll RS ... can cut much quicker with stoned square ground if I choose ! I prefer sharp round for residential jobs but for pure speed I would go sqr/sqr
 
Here’s a John Reilly racer chain ... easily cutting considerably faster than a silvey-ground ... so unless we are cutting the SAME wood with the SAME bar and chain it’s all BS ! I STIHL think the hot-woods build has got more balls bro !
 
@huskihl ... here’s an 064 with some time on it (2.5 million bdft ) vs a 461 fresh out of the shop ... 461 takes by a fuzz
have a nice day !
 
@huskihl , yah I took the liberty of watching some of your videos/ builds ... You most certainly have the high-rpm power no doubt - I’ll give credit where credit is due - however the torque just quite ain’t up to snuff ... can tell just by LISTENING to the tone ! Jmho sir ... OUT
 
Frank Rizzo said:
@huskihl , yah I took the liberty of watching some of your videos/ builds ... You most certainly have the high-rpm power no doubt - I’ll give credit where credit is due - however the torque just quite ain’t up to snuff ... can tell just by LISTENING to the tone ! Jmho sir ... OUT
Click to expand...

I can tell you’ve never run anything but Weak Stihl’s. It’s ok. One day you’ll see the light
 
Frank Rizzo said:
@huskihl , yah I took the liberty of watching some of your videos/ builds ... You most certainly have the high-rpm power no doubt - I’ll give credit where credit is due - however the torque just quite ain’t up to snuff ... can tell just by LISTENING to the tone ! Jmho sir ... OUT
Click to expand...
Yet everyone who runs my saws say that they can't believe how much torque they have.
 
Frank Rizzo said:
Yah , here’s a Hotsaws101 461R that’s tuned fat that wood give your 064 a run for its money — in the SAME wood ; using the SAME bar and chain ! The tree Is ash and it’s 18+” tapering smaller as I work my way up the tree ... work Saw with off the roll RS ... can cut much quicker with stoned square ground if I choose ! I prefer sharp round for residential jobs but for pure speed I would go sqr/sqr
Click to expand...


Frank Rizzo said:
Here’s a John Reilly racer chain ... easily cutting considerably faster than a silvey-ground ... so unless we are cutting the SAME wood with the SAME bar and chain it’s all BS ! I STIHL think the hot-woods build has got more balls bro !
Click to expand...


Frank Rizzo said:
@huskihl ... here’s an 064 with some time on it (2.5 million bdft ) vs a 461 fresh out of the shop ... 461 takes by a fuzz
have a nice day !
Click to expand...


Frank Rizzo said:
@huskihl , yah I took the liberty of watching some of your videos/ builds ... You most certainly have the high-rpm power no doubt - I’ll give credit where credit is due - however the torque just quite ain’t up to snuff ... can tell just by LISTENING to the tone ! Jmho sir ... OUT
Click to expand...

You trolling, bruh?

JFC, back off, ya crazy bastage
 
huskihl said:
You trolling, bruh?

JFC, back off, ya crazy bastage
Click to expand...
How the F am I trolling when I started the thread ? Use ain’t drinking that Michigan lead water are use ? Ya wanna compare more saws ? I can play this game ALL DAY LONG fruitcake
 
mdavlee said:
I can tell you’ve never run anything but Weak Stihl’s. It’s ok. One day you’ll see the light
Click to expand...
Yah , I’ll take my STIHL everyday and twice on Sunday there slim ! 550xp ? Nope ... too many issues ... 562xp ? Nope - STIHL done kicked their butt with the 462cm ... 372xp xtra-turd ? No thanks pal ... 395xp ? Yup got me there ; that’s a damn fine Saw ! But unfortunately the 372,390 and 395xp are goin bye-bye ... 572xp ... well maybe but not enuff for me to go to the dark side !
 
Frank Rizzo said:
Yah , I’ll take my STIHL everyday and twice on Sunday there slim ! 550xp ? Nope ... too many issues ... 562xp ? Nope - STIHL done kicked their butt with the 462cm ... 372xp xtra-turd ? No thanks pal ... 395xp ? Yup got me there ; that’s a damn fine Saw ! But unfortunately the 372,390 and 395xp are goin bye-bye ... 572xp ... well maybe but not enuff for me to go to the dark side !
Click to expand...

Too bad it took a 70cc to beat the 562 down. Not uncommon to see a husky 10cc smaller beat up on the stihls[emoji23][emoji23][emoji23][emoji23][emoji23]
 
mdavlee said:
Too bad it took a 70cc to beat the 562 down. Not uncommon to see a husky 10cc smaller beat up on the stihls[emoji23][emoji23][emoji23][emoji23][emoji23]
Click to expand...
Yah , weight is close ... hp 562xp 4.7 to 6.0 462c - forghetaboutit ! Lotta quality issues from Husky recently... must have hired “Sum Tin Wong or One Hung Lo “ as head of QC dept
 
Frank Rizzo said:
Yah , weight is close ... hp 562xp 4.7 to 6.0 462c - forghetaboutit ! Lotta quality issues from Husky recently... must have hired “Sum Tin Wong or One Hung Lo “ as head of QC dept
Click to expand...

Must be the same guy that made 661 coils and the cases on them where they bust with long bars[emoji1745]‍[emoji3603]
 

Latest posts

Back
Top