Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
Not at all ... I ran it Saturday in a big hunk of maple with the 25”bar
Black Cat Performance meets the 462c
- Thread starter Frank Rizzo
- Start date
-
- Tags
- #1 gairy king of brook gardens trailer park 100% chance gary in denial about meth use 100% chance gary secret lusts after mastermind 101hotsaws makes gary moist 462 specialist my azz 99% chance gairy behind on lot rent 99.9% chance meth rehab didn't work fo gayree adapters look like weiner warmers for midgets black "copy "cat non performance dent puller specialist hard at work dingle clown saw porting earth to frank... fabianized fappin video show gary can only polish knobs gary goo" for mah hair saw 'n' shoe gary wansta smoke masterminds pole gay-ree eatz mucho hamburgs in ny orgies organized alligators castrated stinking up the joint somethin fierce ! washing machine benchtop extroardinaire
Help Support Arborist Forum:
- Status
Yet you didn’t get it till Tuesday.........
D
Deleted member 135597
Guest
this hunk? 2 tanks with a fuel efficient saw? you lie about things you dont even need to lie about. I just don't get it.
D
Deleted member 135597
Guest
Hey frank, you a marine?
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
Motomix
Mike Gott
ArboristSite Guru
Yea it would of!
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
cuinrearview
Red saw lover
So here we are on day three of the build. Nine pages and approaching 3500 views in. What do we have?
YouTube vids(some irrelevant)? Check!
Insults and threats? Check again!
Lame ass terms(I got them wrong, "flow enhanced" and "hot woods port" have replaced the old stupid **** he used to call it)with nothing to back them? You betcha!
Ask yourself, what have we actually learned about the MS462 and how BCP modifies one?
I'm trying to sit back and
but I just thought I'd give a quick update. The next few steps we're "shown" on the "build" should be really interesting.
YouTube vids(some irrelevant)? Check!
Insults and threats? Check again!
Lame ass terms(I got them wrong, "flow enhanced" and "hot woods port" have replaced the old stupid **** he used to call it)with nothing to back them? You betcha!
Ask yourself, what have we actually learned about the MS462 and how BCP modifies one?
I'm trying to sit back and
but I just thought I'd give a quick update. The next few steps we're "shown" on the "build" should be really interesting.
panolo
Seldom right...Always opinionated!
Where do I get the Cat Piss Performance stickers for all my modded equipment? This build thread has been so eye opening I am going to convert all my saws to fart flow for the 72% gains!
D
Deleted member 150358
Guest
My guess mm, timing and **** with the air filter. Do a reset break it in and show video of huge gains. Most of which will be from seating the ring...
shadco
ArboristSite Operative
.
Searching around trying to find out more info in Black Cat Performance I found a picture of their soon to be released Chainsaw Workbenches.
.
Searching around trying to find out more info in Black Cat Performance I found a picture of their soon to be released Chainsaw Workbenches.
.
D
Deleted member 135597
Guest
Yes exactly as expected. I’m not disappointed because well.....I really didn’t expect anything more than what it has been. Next update will be that the saw is done and vids of him cutting the 3 branches.So here we are on day three of the build. Nine pages and approaching 3500 views in. What do we have?
YouTube vids(some irrelevant)? Check!
Insults and threats? Check again!
Lame ass terms(I got them wrong, "flow enhanced" and "hot woods port" have replaced the old stupid **** he used to call it)with nothing to back them? You betcha!
Ask yourself, what have we actually learned about the MS462 and how BCP modifies one?
I'm trying to sit back and
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
That wood be a wise move !
bowtechmadman
Addicted to ArboristSite
I'm sure we will get to see the port work after the cylinder comes out of the spin cycle. Always need to clean up the metal shavings don't ya know. Wouldn't want a metal shaving in your eye due to the improved flow!
So you ran 3 tanks through actual 25" bar appropriate test wood and didn't bother to do a 30 second video against the 362? Or at least by itself...
Must've been a pretty 'big hunk' to go through that much fuel.
And you couldn't have brought just one piece of all that home for a real test?
Yet again... Hmmm....
D
Deleted member 135597
Guest
Exactly, his motive for saying this is so he can say the saw was somewhat broken in before any mods were done. It will improve his gain because right now he is running as many tanks thru the saw as he can to break it in and give a false representation of the gains he achieved. Then with the after mod video he will also put on his John Reilly chain for the test. Don’t forget, we are as sharp as bowling balls to him.
D
Deleted member 135597
Guest
It’s all a waste of time, no one believes him and no one will send a saw to him for port work so all this is irrelevant. I’m checking out of this bullchit thread too. Have at it jizzo, the floor is all yours.
NeSurfcaster
ArboristSite Operative
Noe of this adds up, I never understood why some people lie so much. They spend there whole life trying to remember what they lied about earlier. Why do you make this thread so difficult? Just break the saw in, put on a 25" + bar and bury it in a 25"+ log, Do whatever you wanna do to it and run it again in the same 25"+ log. Stop trying to be deceiving and back up your trash talk.
You didn't write a check your a$$ can't cash did ya?
You didn't write a check your a$$ can't cash did ya?
I dated a girl one time that had a lot of flow enhancements. It was a very demeaning time for me. like throwing a hot dog down the hallway.
- Status
