Black Cat Performance meets the 462c

Advertise with us
Wesspur
Shop deals on ebay
shop deals on amazon
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
wcorey said:
There's a couple years of 'history' between the op and some members here and the many other chainsaw related sites he's been booted from.
He's an attention whore that pretty much begs for all the **** he gets...
Click to expand...
 
stinkbait said:
I read a lot and post very little, and have taken long breaks at times from AS and my chainsaw hobby (because life), so I have no idea why everyone is on here dogging the OP. Can someone fill me in on this. I saw a comment earlier that this thread was on page 9 without any useful info, but if every just came to spectate instead of breaking the guys balls this thread would still be on page 1.
Click to expand...
I'm the guy on page nine. Let me ask you, can you find content by the OP posted ANYWHERE on the interwebs that informs, teaches, or is useful?o_O And that's outside of the behind the scenes interaction that most don't know about.

Don't get me wrong, I know I'm no bastion of information. But I don't pretend to be either. Let's be real here.
 
stinkbait said:
I read a lot and post very little, and have taken long breaks at times from AS and my chainsaw hobby (because life), so I have no idea why everyone is on here dogging the OP. Can someone fill me in on this. I saw a comment earlier that this thread was on page 9 without any useful info, but if every just came to spectate instead of breaking the guys balls this thread would still be on page 1.
Click to expand...
The guy came to the forum claiming "super dooper" performing saws modded by his own fair hands & rubbishing known quality modders/porters & their work .there was always doubt as to if in fact he did any porting or bought in & claimed it was his work . a straight sensible answer could never be obtained no third party comments as to the backing up of his claims so from my point of view a modicum of recoil cord pulling was entered into but he seemed oblivious to the comments he was receiving
 
stinkbait said:
I read a lot and post very little, and have taken long breaks at times from AS and my chainsaw hobby (because life), so I have no idea why everyone is on here dogging the OP. Can someone fill me in on this. I saw a comment earlier that this thread was on page 9 without any useful info, but if every just came to spectate instead of breaking the guys balls this thread would still be on page 1.
Click to expand...

This is the chain saw twilight zone where everyone is stuck in sixth grade and posting with one hand on their penis.
 
Del_ said:
This is the chain saw twilight zone where everyone is stuck in sixth grade and posting with one hand on their penis.
Click to expand...
I don't agree with that assessment the thread was entered into into as a what was the best 40cc saw, we were then treated to what has been described by the phantom porter, he with his bullshite & lies & the other side attempting/failing to get any sense in the form of answers & no matter what was pointed out it was answered with meaning less drivel
 
Little Al said:
I don't agree with that assessment the thread was entered into into as a what was the best 40cc saw, we were then treated to what has been described by the phantom porter, he with his bullshite & lies & the other side attempting/failing to get any sense in the form of answers & no matter what was pointed out it was answered with meaning less drivel
Click to expand...


So you are blind to the fact that one fellow is playing a bunch of internet nerds like a too tightly strung banjo? Rhetorical question.
 
Del_ said:
So you are blind to the fact that one fellow is playing a bunch of internet nerds like a too tightly strung banjo? Rhetorical question.
Click to expand...
It took 3//4 posts to realise he was a Doe Doe whilst I may have continued for to long I don't think I qualify as a member of the "Blind Nerd" community it was his bad mouthing known quality porters that pissed me off ,& even so a modicum of level headedness is not a bad thing. It's a completely different ball game on line to being face to face with some one for gettng a handle on the if's & buts.
 
Del_ said:
This is the chain saw twilight zone where everyone is stuck in sixth grade and posting with one hand on their penis.
Click to expand...

And your replies in any one of his threads have been any better? You've not taken the high road your self Nancy.
 
Del_ said:
So you are blind to the fact that one fellow is playing a bunch of internet nerds like a too tightly strung banjo? Rhetorical question.
Click to expand...

I’m certainly not blind to the fact that you’re attempting to do the same thing.
You’re no different, just playing the devils advocate side of things is all
It’s winter, it’s cold, people are bored, why not have a little fun.

While this latest development is interesting, i actually hope ‘frank’
gets his voice back so the mob can continue to taunt him like the village idiot he sets himself up to be.

Entertainment value like this thread is what this site is devolving into anyway. Keep it all in one place so as not to pollute the good forums...
 
Why don’t you quote some of your most epic moronic posts for people to read. Then we will agree or disagree if they are epic or not.
 
Haven't read the last 12 pages but I presume on Phabz's big build thread extravaganza by now after the degree wheel mapped the cylinder and mod marks layed out on the nikasil, the machine works been done, Foredom work to intake, exhaust & transfers complete, muffler work done and now we're at a final testing stage with a stopwatch in hand maybe pullin the cylinder to view wash patterns etc. Flow enhancement BS complete with serious gains. Is it Riley or Razor cutty cutty? This saw outta be haulin some serious butt by now...Fabzio what up builder? Don't tell me the meth wore off...
 
picked up about 6% gain with this tuned-pipe exhaust ... note chain has about 10 cookies on it so with a Fresh off the roll chain the gains “Wood” be a fuzz more ! Noticeable increase in mid-range power and winds out a few hundred rpms over stock ! I’m going to increase the air flow via a custom-machined adapter and a K/N filter and video the results ... bear with me I need to obtain parts/aluminum stock ... The FINAL video will showcase above mods (tuned pipe and adapter with K/N filter) with a hot-woods port ! I may have to bore the stock carb to allow more flow as the measurements indicate the stock carb may not flow enough to get the 25-30% gains I’m shooting for !
 
CR888 said:
Haven't read the last 12 pages but I presume on Phabz's big build thread extravaganza by now after the degree wheel mapped the cylinder and mod marks layed out on the nikasil, the machine works been done, Foredom work to intake, exhaust & transfers complete, muffler work done and now we're at a final testing stage with a stopwatch in hand maybe pullin the cylinder to view wash patterns etc. Flow enhancement BS complete with serious gains. Is it Riley or Razor cutty cutty? This saw outta be haulin some serious butt by now...Fabzio what up builder? Don't tell me the meth wore off...
Click to expand...
It’s an off the roll chain my friend - same chain available to anyone ! No Reilly “racer” or Razer “cutty cutty” Why do a build if you are using different chains ? Wouldn’t that skewer the results ? Trying my best to keep all things equal cr888 - I should have made a fresh loop for the latest test I agree ... It would have only made the muffler modded saw cut a fuzz quicker ... Your “don’t tell me the meth wore off” statement is an example of pure fabricated grade A-1 RUBBISH ! ... I do not take/nor have taken ANY hard drugs in my life ! I really don’t know where this nonsense is coming from but to make statements / accusations like this is really uncalled for ... consider the source
 
Status
Not open for further replies.

Latest posts

Back
Top