I'm curious why you believe the MSV on the 462 is correct and fine for whatever the stock psi is but not at 200 and why it would make a difference since detonation isn't an issue with such a relatively small squish area.
Black Cat Performance meets the 462c
- Thread starter Frank Rizzo
- Start date
-
- Tags
- #1 gairy king of brook gardens trailer park 100% chance gary in denial about meth use 100% chance gary secret lusts after mastermind 101hotsaws makes gary moist 462 specialist my azz 99% chance gairy behind on lot rent 99.9% chance meth rehab didn't work fo gayree adapters look like weiner warmers for midgets black "copy "cat non performance dent puller specialist hard at work dingle clown saw porting earth to frank... fabianized fappin video show gary can only polish knobs gary goo" for mah hair saw 'n' shoe gary wansta smoke masterminds pole gay-ree eatz mucho hamburgs in ny orgies organized alligators castrated stinking up the joint somethin fierce ! washing machine benchtop extroardinaire
Help Support Arborist Forum:
- Status
I'm curious why you believe the MSV on the 462 is correct and fine for whatever the stock psi is but not at 200 and why it would make a difference since detonation isn't an issue with such a relatively small squish area.
That's funny.
I thought grunt saws went out of style with New scool choppers with big back slicks.
Stocks are down right now. but they will come back in again... J/k about the saws
I've had many saws with considerably less compression that had more juice in the wood. They were of equal size. Obviously there is many other factors.
It always super sucks in winter if your working off coast when your saw sat out and its a - 30+ morning. They get tight. Hard to get any speed out off a pull. I just prime them.
D
Deleted member 135597
Guest
Want some examples of your actions and clever trolling?
Mastermind Worksaws
The Enabler
Which guys? Who here have you built a saw for Frankie?
I'm just wondering....
Myself.....I've done about 2000 saws for customers all over the world. Not that many in the grand scheme of things....so naturally, I'm still learning.
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
2000 saws ? Well ya got me beat by a country mile ! The only “Saw” business I’ve done on here is an 064 purchase although I’ve had numerous pm requests for work which I respectfully declined ... A guy like me can make a lot more bread using them than building them - that being said during the down-time (wintertime) the saws are getting some time in the “cauldron of performance “ lol
We've all seen your version of "a little more".
D
Deleted member 135597
Guest
So what your saying is all your vast knowledge is regurgitated **** you have come across on the internet, no real world experience, just your untested theory correct? Yet you insist that your way is the correct way, and the builders that have done 1000s of saws over decades have it all wrong right? Hell u read it on the internet, it must be correct! Lmfao! Let me fill ya in on sumfin also, any pm u MAY have received about hiring your fake services was from people fuggin with you
Little Al
Addicted to ArboristSite
So after all the bullshite, lies,deceit, 3 act plays, multiple wrongly claimed video's, we come to post #606 were he finally admits to NOT doing any porting for third parties & only buying in an 064 The tack has changed to I can make more money cutting /splitting wood.Is there doubt about the splitter I wonder ? ( Cry wolf syndrome)& who's the all singing dancing cuts many % better than stock ported saw is being used ? on who's Dyno are the figures obtained ? It's taken time but finally we have an admittance to facts we suspected all along the guy is a fraud. I don't dispute he may or may not have an uprated saw/s, but I will never be convinced they are the outcome of his own hands Why for goodness sake if he wanted to spout off didn't he say I got myself a saw ported by XXXX & find I can cut Z amount more wood in a day/week ,& I'm sure most folk myself included would have said " good on yer go for it " but to rubbish proven porters & their work when you have no examples of your own work being used by 3rd parties to me is a downright insult to the proven guys. In the time Iv'e been in the wood business since 1958 I guess I've shifted as much or more wood than most but I care less if folk are/are not impressed, the end result was /is i'm happy with my lot & over the the years it's paid the bills with a bit extra Don't get me wrong I will & like to help if I can & I like reading of folks achievements if they ring true which most do.
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
Yah , when you came out of the womb you were able to walk talk and port saws I presume ? Must be nice ... I think everyone else had to LEARN how to do the above ! I’m not insisting MY way is the “correct or only way” ... again ... you have your theories and we have ours and I think thats Wonderful ! It’s a SAW guy - go cut some wood already !
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
That’s great Al ! I never “admitted” to not doing work for 3rd parties at all ! ... I was asked by mastermind who on this site I had ported saws for and I gave him an honest answer ... believe it or not Al there’s life outside of arb site and oh-pee-e forum ! My what a presumptuous man you are Al ! And a spendthrift with your tongue to boot ! Good day sir - now get off the forum and go cut / process some wood already
D
Deleted member 135597
Guest
It appears your cart is miles ahead of the horse. Your supposed to learn how before you pretend you know everything. You never answered my question. Who is “we”? Your so big you have employees modding also?
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
It appears that you are a troll and not a very good one at that ... I’m not at your beck and call nor am I required to answer any questions as we’ve never done any business and will certainly not be doing any in the future ! Adios basher
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
cuinrearview
Red saw lover
Someone should start a poll about what we learn when Black Cat Performance meets a saw, cuz I'm having a hard time grasping any education on a saw from this thread. Hust a whole lot of insight into the character behind BCP...
cuinrearview
Red saw lover
In fact, this garbage should be moved right out of the chainsaw forum. This is definitely off topic material.
The people of who's methods/theories he approves and on who's coat tails he's attempting to ride to greatness or whatever, whether they like it/know it or not.
If you haven't noticed, his MO is to align himself with notables, be it music, cartoon character's, celebrities, etc, in hopes some of the greatness gets associated with him.
Standard marketing tactics type deal, it must work on someone...
D
Deleted member 135597
Guest
I think you owe everybody on this site and whoever else knows you a big “thankyou” for buying you a 462c. Ya know what I mean Gary? Wink wink. Your tax dollars hard at work boyz
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
Haha ... so if my approach /thoughts don’t align with yours or others then they are to be ridiculed and cast away ? That’s funny right there haha- straight out of the Brad Snelling school of sop ( that means standard operating procedure if you weren’t aware - gotta spell everything out for ya cause ya seem just a wee bit ....) Must be nice to be you Mr Know-it-All ... Aren’t you glad you’re you ! Cause I’m happy I’m not ! LMFAO
Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
Little Al
Addicted to ArboristSite
How much wood you cut today Frank? (Honest answer if possible )Ive had a bit of a pissy day Iv'e only managed 18 truckloads
- Status
