Black Cat Performance meets the 462c

[huskihl]

I highly doubt your stock 036 will out cut a 362c ported by Frank, sorry bud,not buying it. My bullchit meter is going off.

You should send your 362 to Frank and then do a build thread on it and keep us all posted along the way

 

[Frank Rizzo]

Why would I want that saw? I have an 036 that wood put the 362 to shame. O and I usually work 60 hours a week.

No juggling / deflection/ forum speak - just answer question - if not then kindly go do some “work” ! Heavens knows if I were “working” 60 hrs a week I wouldn’t have much time to comment on chainsaw forums !

 

[Frank Rizzo]

Still waiting for that 241's dyno sheet showing 7.5hp+!

Never said a 241c was put on Dyno and was making 7.5hp ... YOU DID ! Probably misinterpreted the statement and now are twisting words to suit your agenda ... Typical Snelling tactic from years ago but very very WEAK !

 

[Deleted member 135597]

You should send your 362 to Frank and then do a build thread on it and keep us all posted along the way

I don’t think that would be ethical, I’m sure the work done is proprietary. I’ve never had a saw ported but I would assume a non disclosure statement would have to be signed? I mean I see the time and testing involved, wouldn’t the person want that protected?

 

[Deleted member 135597]

Never said a 241c was put on Dyno and was making 7.5hp ... YOU DID ! Probably misinterpreted the statement and now are twisting words to suit your agenda ... Typical Snelling tactic from years ago but very very WEAK !View attachment 713274

I had to unignore everyone so I can understand what is going on, very confusing with 10+ people on ignore

 

[user 122190]

I had to unignore everyone so I can understand what is going on, very confusing with 10+ people on ignore

So what is going on? Who's winning?

 

[Deleted member 135597]

So what is going on? Who's winning?

I don’t think there’s ever a winner when people act like this. I know I wasn’t brought up to hide behind a door and talk **** about someone.

 

[Deleted member 117362]

I had to unignore everyone so I can understand what is going on, very confusing with 10+ people on ignore

Are you going to post before and after videos of your saw, you send to BCP? Please use same log (not branch) in your videos.

 

[Deleted member 135597]

So what is going on? Who's winning?

What’s going on? A smear campaign as far as I can tell

 

[Deleted member 135597]

Are you going to post before and after videos of your saw, you send to BCP? Please use same log (not branch) in your videos.

No deal has been struck yet so that’s jumping the gun. I’m compiling a list of questions I will be sending frank via a pm because I doubt he wants anymore **** thrown at him from you fellas. Hell I don’t know he might be out of my price range.

 

[user 122190]

What’s going on? A smear campaign as far as I can tell

90% of this site is personal attacks, and much of it just nasty and for little or no reason. Some real Intels here that I had to put on ignore, 30 or more at least. 40yo men acting like 7yo children.

 

[Deleted member 135597]

90% of this site is personal attacks, and much of it just nasty and for little or no reason. Some real Intels here that I had to put on ignore, 30 or more at least. 40yo men acting like 7yo children.

I’ve lurked on this site for many many years even though I just became a member, it’s really gone down hill and it appears the snowball has picked up speed as of late.

 

[cuinrearview]

I’ve lurked on hotsaws101s YouTube page for many many years

Fixed it for ya Gary

 

[Frank Rizzo]

I don’t think that would be ethical, I’m sure the work done is proprietary. I’ve never had a saw ported but I would assume a non disclosure statement would have to be signed? I mean I see the time and testing involved, wouldn’t the person want that protected?

No signed statement ... however a gentleman’s agreement not to post pics of work / R&D / port timing numbers etc ... common sense and respect really ... one can make the argument “well I BOUGHT the Saw I can do WHATEVER I want “ and this is true ... That individual may find himself wading thru the pool of subordinate mechanics again if the original builder is made aware of the deceit / skullduggery !

 

[Deleted member 135597]

Fixed it for ya Gary

Yeah move along toolbag, no clue what your talking about. My name is Steve by the way, what’s Yours?

 

[Frank Rizzo]

Sleeve installed ... STIHL waiting on dealer ... apparently the P/N are valid but the “system” has not been updated yet !

 

[Frank Rizzo]

441c hot-woods port assembly nearing completion

 

[cuinrearview]

Yeah move along toolbag, no clue what your talking about. My name is Steve by the way, what’s Yours?

If you've "lurked for many many years", you would know my name. Or should I move along Gary?

 

[Deleted member 135597]

If you've "lurked for a while", you should know my name. Or should I move along Gary?

Yeah sorry bub, not that concerned with you to pay attention to your name. Ever here the term narcissist? Might wanna look up the definition and seek help for it

Here, read up, I did the work for ya. https://10faq.com/health/narcissist...2Cs3_svbHrhIPbunoZMe6Y6MM9wwkhixoCpC0QAvD_BwE

 

[Mike Gott]

Sleeve installed ... STIHL waiting on dealer ... apparently the P/N are valid but the “system” has not been updated yet !View attachment 713283

Did you goober that weld on with a stick welder or what? That’s some crude work! Here’s what a nice one looks like!