Scrounging Firewood (and other stuff)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Not sure they are a high compression saw, so probably 150 or so, I've never been too interested in them. Certain mufflers on them are very expensive so that is something to look out for. As has already been said, there should be zero scratches on the piston. The 460 looked bad, so bad I'm pretty sure I could ha e felt it just pulling the recoil slowly which is something I typically do when looking at a saw.
I think you should do as was suggested and get the other saw squared away and then see what your "needs" are.
Pretty sure Mike has done some milling with his 046/460's, tuning and remembering its not a 90cc saw are very important though, as is keeping the chain very sharp.
Thanks. I'm not getting a warm fuzzy feeling from the seller of the 880. He refuses to answer any of my questions and I only get short replies. Something feels off. I just hated loosing out on the possibility of a good saw. Plus, I keep telling myself there has to be something wrong with the saw if he only wants $450 for it. It's an 880 not an 088 so it can't be that old. So you're probably right. Fix the 046 and see where it takes me.
 
Crazy. My package made it to St. Paul then went back to Kansas!

September 2, 2020
In Transit, Arriving Late
Your package will arrive later than expected, but is still on its way. It is currently in transit to the next facility.
August 31, 2020, 4:13 am
Departed USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 30, 2020, 9:51 am
Arrived at USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 29, 2020, 5:27 pm
Arrived at USPS Regional Facility
SAINT PAUL MN NETWORK DISTRIBUTION CENTER
August 29, 2020, 10:26 am
Arrived at USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 29, 2020, 7:51 am
Arrived at USPS Regional Facility
KANSAS CITY MO DISTRIBUTION CENTER
August 29, 2020, 12:11 am
Arrived at USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 28, 2020, 10:56 pm
Accepted at USPS Origin Facility
MCPHERSON, KS 67460
August 27, 2020, 4:45 pm
Shipping Label Created, USPS Awaiting Item
MCPHERSON, KS 67460
 
Crazy. My package made it to St. Paul then went back to Kansas!

September 2, 2020
In Transit, Arriving Late
Your package will arrive later than expected, but is still on its way. It is currently in transit to the next facility.
August 31, 2020, 4:13 am
Departed USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 30, 2020, 9:51 am
Arrived at USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 29, 2020, 5:27 pm
Arrived at USPS Regional Facility
SAINT PAUL MN NETWORK DISTRIBUTION CENTER
August 29, 2020, 10:26 am
Arrived at USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 29, 2020, 7:51 am
Arrived at USPS Regional Facility
KANSAS CITY MO DISTRIBUTION CENTER
August 29, 2020, 12:11 am
Arrived at USPS Regional Origin Facility
WICHITA KS DISTRIBUTION CENTER
August 28, 2020, 10:56 pm
Accepted at USPS Origin Facility
MCPHERSON, KS 67460
August 27, 2020, 4:45 pm
Shipping Label Created, USPS Awaiting Item
MCPHERSON, KS 67460
Bastiges.

And people wonder why the place loses money left and right.
 
880 is over 2 grand here in Canuck bucks. So 450 would be a deal even if broken. Can't imagine it costing more than 500 for a professional rebuild with OEM parts so half the cost of new. Don't underestimate the 460, it will handle the size of milling you are wanting, but it ain't an 880 that's for sure. I get it, it would be cool to own a saw that could cut anything growing on the continent!

Sent from my CLT-L04 using Tapatalk
 
Widow neighbor called tonight wondering if I wanted the wood from a couple of trees she is having a tree service take down near the house. Of course I do! Told her to get them to give her the cheapest price to put them on the ground and I would take care of the wood from there. She insisted that the wood will be stacked next to her barn and i could drive up to it with the truck to load at my leisure.

With that motivation I decided it was cool enough to move a little wood this evening.
20200902_190522.jpg
20200902_191525.jpg
20200902_192228.jpg
20200902_193211.jpg
 
Widow neighbor called tonight wondering if I wanted the wood from a couple of trees she is having a tree service take down near the house. Of course I do! Told her to get them to give her the cheapest price to put them on the ground and I would take care of the wood from there. She insisted that the wood will be stacked next to her barn and i could drive up to it with the truck to load at my leisure.

With that motivation I decided it was cool enough to move a little wood this evening.
View attachment 852616
View attachment 852617
View attachment 852618
View attachment 852619
Gonna call you the one wheeled wonder lol
Is that part of the wood, I'm available to come drop a couple trees for her and you know I plan on going that way so...
Managed to split a bucket today, glad its cooler, but its still warmer.than I enjoy and tomorrow it's supposed to be warmer yet :baba:.
So I've got about a cord and a half off this pile so far, bummer is I am getting a lot going on the bonfire pile as some has rotted, the good thing is I'm getting a lot on the bonfire pile :blob2:.
Quite a bit to go, one bucket at a time, shouldn't be more than 50 buckets left :rolleyes:, cutting is more fun!
20200902_184611.jpg20200902_184644.jpg
 
Thanks. I'm not getting a warm fuzzy feeling from the seller of the 880. He refuses to answer any of my questions and I only get short replies. Something feels off. I just hated loosing out on the possibility of a good saw. Plus, I keep telling myself there has to be something wrong with the saw if he only wants $450 for it. It's an 880 not an 088 so it can't be that old. So you're probably right. Fix the 046 and see where it takes me.
So did you back off from looking at it?
 
Gonna call you the one wheeled wonder lol
Is that part of the wood, I'm available to come drop a couple trees for her and you know I plan on going that way so...
Managed to split a bucket today, glad its cooler, but its still warmer.than I enjoy and tomorrow it's supposed to be warmer yet :baba:.
So I've got about a cord and a half off this pile so far, bummer is I am getting a lot going on the bonfire pile as some has rotted, the good thing is I'm getting a lot on the bonfire pile :blob2:.
Quite a bit to go, one bucket at a time, shouldn't be more than 50 buckets left :rolleyes:, cutting is more fun!
View attachment 852627View attachment 852628
And I have the FIL's tractor with bucket in the barn... but there's no exercise in that to work off the Covid-10 I have (think freshman-15). That wood is from earlier scrounge from - you guessed it - my new best friends.

I may have told you before, but I would probably find a way to do it at my own house, but no way I'm cutting trees that can reach someone else's house. She's got a guy coming in and she already told him that I would want the wood.

Stacking isn't *so* bad. At least it looks good when its done.
 
And I have the FIL's tractor with bucket in the barn... but there's no exercise in that to work off the Covid-10 I have (think freshman-15). That wood is from earlier scrounge from - you guessed it - my new best friends.

I may have told you before, but I would probably find a way to do it at my own house, but no way I'm cutting trees that can reach someone else's house. She's got a guy coming in and she already told him that I would want the wood.

Stacking isn't *so* bad. At least it looks good when its done.
I hate to say this, but if you ain't down to the covid-9 yet you probably ain't gonna loose it this yr :laugh:.
I here you, that's why I said I'd be happy to do it, will cut trees for :envy:.
But if you need a hand I'd be happy to help.
I'll bring the rope and the big shot for the cherry when I come thru :p.
 
I hate to say this, but if you ain't down to the covid-9 yet you probably ain't gonna loose it this yr :laugh:.
Meh, its probably only really Covid-5 and it happens every year after I stop playing basketball (and start drinking beer in the summer.) Unfortunately that happened early this year and the fall season is already cancelled. So we could get to Covid-10...
 
I haven't contacted him again nor has he contacted me. I'm a little afraid to. He still won't answer any questions about the saw.
If he is being evasive about questions he either has something to hide or has someone that appears to be more interested than you. Probably best to let this one go then.
 
Well I ended up getting a $25 gift card from eBay for being a long term member of over 20 years. I needed a few rim sprockets as well as some more mix oil so I put together a nice list of parts and did some shopping.

I never got an email about this, it was in my eBay inbox within the site itself. So if you’ve been a long term member, might not hurt to check your messages box within there.
 
Ironwood?

Nope not iron wood , not here in New England but I can't say for sure what it is because it was Part of a drop off of end pieces.

Philbert
Crazy. My package made it to St. Paul then went back to Kansas!

I had that with an impact driver I got on eBay. It started out from Iowa went all over the pace and ended up outside of Boston and went to California. After 3 or more weeks the seller refunded me, not sure if he ever got it back.
 

Latest posts

Back
Top