Sachs Dolmar 153

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I dont think I need the ignition coil. Just the starter for the 153 saw I have. Much appreciated.

Brian
 
I have a 153 that was coverted to a winch unit. I have been meaning to part it out but haven't gotten around to it. I will put up some pics if anyone is interested. Shipping is from Sweden.
I would be interested and would like to see the pictures please. Thanks a lot
 
I also have the topend and intake track. I have no history on this unit. It looks as though the piston has eaten some metal possibly a circlip? The rings must have been replaced and probably the cylinder because it is very nice with only a very thin scratch from the top of the FW side upper transfer to the combustion chamber. Factory honing is readily visible from top to bottom all around as with the piston. Piston is very low hour and salvageable IMO, the rings are fine.
F1108950-391B-4061-B90C-1FCF12706367.jpeg2D98CA64-AAB4-4F55-9ACE-E71ECEEFD6C5.jpegD6619C48-30D3-4E66-9A99-7337996E12AD.jpeg2E38CF8C-7A45-4A82-A56E-01E4E8201D61.jpeg
 
I also have the topend and intake track. I have no history on this unit. It looks as though the piston has eaten some metal possibly a circlip? The rings must have been replaced and probably the cylinder because it is very nice with only a very thin scratch from the top of the FW side upper transfer to the combustion chamber. Factory honing is readily visible from top to bottom all around as with the piston. Piston is very low hour and salvageable IMO, the rings are fine.
View attachment 1065797View attachment 1065798View attachment 1065799View attachment 1065800

I see a few goodies there - sending a PM...
 

Latest posts

Back
Top