Remember when I posted this???

Remember when I posted this??? VIDEO added....

Remember when I posted this???





Well it's up and running!!!!!!!!!!!!!!!!!!!

I want to thank Evan and jacob j for all your help!!!



Here is a short list of parts that went in to this saw...

STIHL 064
Replaced parts list..........
part # 3591220 oil cap sealer ring
part # 11227909905 annular buffer
part # 11220292301 cylinder gasket
part # UPARTS muffler screen
part # 3591230 gas cap sealer ring
part # 11227909102 hand guard kit
part # 11251490601 exhaust gasket
part # 90223411050 spline screws
part # 11173505800 tank vent
part # 11271418600 impulse line
part # 3503504 pickup body (fuel filter)
part # 11221903400 elastostart assembly
part # 1124953500 rewind starter pawl spring
part # 11241957200 pawl (X2)
part # 11240071010 oil line kit
part # 90754784155 spline screw (replacemant for top cover)
part # 6421216 stihl 8 tooth rim
part # 11227909910 annular buffer
part # 7545 bosch ws7f (plug)
part # 1128209400 compression release
part # 00001 201654 air filter
part # CRF 5412 caber f-cast rings
part # 54zn12 mahle piston and cylinder 54mm
part # 1226567700 chain catcher
part # 00004050600 plug wire
part # 11224402210 ground wire
part # 11281291100 carb gasket
part # 11223510901 tank guard
part # 11221412201 manifold boot
part # 00009970911 clutch spring (X3)
part # 11103531600 valve
stihl 064 plastic name tag
stihl starter rewind plastic tag
after market pnw sproket cover with chip guard

Not sure if it all there or not :hmm3grin2orange:

More pic's to come...

Looks awesome!! Good work! hows it run?

where did you get the PNW cover?

A few more pic's..

The OEM 066 top end...





Evan's muffler mod..

Very nice!

7

matt9923 said:

Looks awesome!! Good work! hows it run?

Click to expand...

Sweet!!!!!!!!!!!!

I have an 066 in pieces in a box. Ill probably get a 3/4 wrap for it and a PNW cover. I like the look of them.

need to save some money for that project, probably repaint it.

The shroud I made for the decomp valve...







O and the last thing I did was the 9 pin rim...



I had to have a 74 dl chain made up..

matt9923 said:

I have an 066 in a box. Ill probably get a 3/4 wrap for it and a PNW cover. I like the look of them.

Click to expand...

I want the USA bar but Madsen's all out and no idea when they will see them...

Looks real good. I take it the cylinder ported, if you're planning on pulling a 9-pin?

can some one tell me how to embed a photobucket video???

blsnelling said:

Looks real good. I take it the cylinder ported, if you're planning on pulling a 9-pin?

Click to expand...

Nope not yet just playing around...
This thing will never see a long bar 20" is over kill most times around here..I just wanted to see what a 9 pin on a 20" bar would do...

That is an awesome rebuild! Did it pay off price-wise to do the complete remake?

sbhooper said:

That is an awesome rebuild! Did it pay off price-wise to do the complete remake?

Click to expand...

NO!!

I see 066's sell on the bay for what I have in this...Although they are not in as good shape..

Anyone else see that 064 sell the other day for $590????

Plus you know what's in your saw, and that it's done right.

Very nice job!

Wow, that thing cleaned up like a Brad Snelling jobber.

Ok first cut with the 064/066...Dead elm I cut 2 years ago................


http://www.dropshots.com/southbound#date/2010-03-14/14:24:00

Second cut some 2 year old cherry...........

http://www.dropshots.com/southbound#date/2010-03-14/14:25:38

<img style="visibility:hidden;width:0px;height:0px;" border=0 width=0 height=0 src="http://counters.gigya.com/wildfire/IMP/CXNID=2000002.0NXC/bT*xJmx*PTEyNjg2MDYwMDY5MzcmcHQ9MTI2ODYwNjAzNjgyOCZwPTEyNTIxJmQ9Jmc9MSZvPTYwOGE*ZDc*ODY*MzQyN2E5YzEx/MGMzZmNlOTZlYzMzJm9mPTA=.gif" /><center><object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="425" height="381"><param name="movie" value="http://www.dropshots.com/dropshots.swf?p=0&u=http://media8.dropshots.com/photos/705604/20100314/142400.flv&l=http://www.dropshots.com/southbound#date/2010-03-14/14:24:00&d=1" /><param name="wmode" value="transparent" /><param name="allowfullscreen" value="true" /><param name="allowScriptAccess" value="sameDomain" /><embed src="http://www.dropshots.com/dropshots.swf?p=0&u=http://media8.dropshots.com/photos/705604/20100314/142400.flv&l=http://www.dropshots.com/southbound#date/2010-03-14/14:24:00&d=1" wmode="transparent" allowfullscreen="true" allowscriptaccess="sameDomain" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="425" height="381"></embed></object><br /><span style="font-family:arial; font-size:8pt;"><a href="http://www.dropshots.com/">Photo Sharing</a> - <a href="http://www.dropshots.com/">Video Sharing</a> - <a href="http://www.qualityphotoprints.com/">Photo Printing</a></span></center>

Looks real strong.

Thanks!!