034

New member and looking for some good advice, thanks in advance for the help! As luck would have it I had an accident and shattered the handle on my 034. I’ve found the appropriate part # for a replacement. My concern is how well the aftermarket handle are built and if anyone makes one that...

I'm interested in useable pistons even the worn down old one you might have laying around. Worn skirts not mashed, broken, dented, skidded or otherwise mechanically damaged. I'm sure that was clear as mud 😉 NOS is on my radar Need one 46x1.2 Also looking for the Husky 55 piston measurements...

660 650 066 064 front muffler covers. No outlet type. Busted and spun 660/066 cases or halves with or without cranks. Busted or not tank handles for 1122 or 1128 034, 036, 034S 360 360P parts and builders boxes. 034 plastics 084 anything or 1124 saws and parts. Ms400's or burnt jugs and pistons...

I am in search of a smaller ported saw for a friend. 50cc class preferably Stihl but open to husky as well. Anything out there?

034 super for sale, power head only this saw came to me as a, idk whats wrong. saw was not running some parts were janky on it. tore it down and the cylinder was loose. took that off and the gasket was tore up. piston looked good installed a new AM base gasket. added a new AM rope and pull...

Any of you guys looked into putting an 038 magnum p/c on an 034. I was having a discussion about big bore options on my buddies 034 and wondering if it could be done. I don't mind some extra machining if it is a doable mod.

I've got an older 034 that I picked up in a "box of parts" state, prev owner pulled carb and whole air side off presumably because of carb issues. Carb was a Tillotson and missing almost all the parts, and I couldn't find a good source for complete replacement. Saw has good compression...

selling a pretty nice 034. Pulled 170 comp. has tillotson carb, new clutch bearing and plug. Was pretty dirty from the prior owner but cleaned up good. Setup with a 3/8 7 pin but can change if needed. Missing one small plastic pc by clutch. I couldn’t find one as it has the less common 2 pc dust...

Hello All. Newbie here. (I even Posted this in the milling forum... Reposted over here) Great info, I find myself coming to this site all the time. Figured I might as well sign up and join in. I have been given an old Stihl 034AV by my dad that needs some serious attention. GOOD: - Holds Gas...

Hello All. Newbie here. Great info, I find myself coming to this site all the time. Figured I might as well sign up and join in. I have been given an old Stihl 034AV by my dad that needs some serious attention. GOOD: - Holds Gas - Brake works - Bar's straight - Pull cord returns beautifully -...

Looking to find out the main bore and venturi bore for stihl 034 av super and stihl 044. I'd like to put a bigger carb om my 026 woody pro.