076

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. F

    076 air filter upgrade from ts760?

    I have an 076 chainsaw, been thinking for a while now it'd be so much better with a ts760 air filter and cover (same frame/chassis). Basically the cut off saw ts760 has a raised filter cover and decent paper filter with outer and inner pre and post filters, that's a three stage filter before it...
  2. Lightning Performance

    Want to Buy 084/088 880 parts good or beat up

    All the usual suspects, take-offs, broken or that your done with now. Any 1124 or any large saw parts for Stihl will be considered. 075/760, 105s, 050, 051, TS510, 070, 090, ect... If you have an add here listed I've seen it already. Plastics Starters and parts Clutch covers Oil pumps working or...
  3. D

    Looking for large mount bar 42" 3/8 .063

    Looking for large mount bar 42" 3/8 .063. So far I've bought 4 bars on eBay the people claimed were large mount that fit Stihl 070/076/084/088/ 090/ and MS880. Everyone of them has been the small slot for the smaller saws. Getting VERY frustrated. My 36" bar is too small milling and need a...
  4. oaky

    stihl 076 cylinder studs

    howdy just removed the top end off my 076. theres four long studs that hold down the jug, manuel sortof skips over the specifics on how to remove them, just talks about the 051 procedure, thanks stihl. wondering how to remove them without hurting anything, are they reverse threaded?
  5. manwithsaw

    Want to Buy Big Old Saw: 075; 076, 084, etc

    Looking for a big old saw, 110cc+ Will consider running or a simple project What do you have?
  6. D

    076av parts

    Gday guys im from Australia and was hoping someone around the world could help me out.. ive recently acquired a stihl 076av super, runs mint but is missing the chain sprocket cover, ive hunted high and low but cant find one anywhere and no aftermarket units are available.. does anyone have...
  7. alexcagle

    Is this 075/076 Cylinder useable?

    Anybody know, or have opinions, if the chrome loss between the exhaust and intake port on this 1111 series Stihl 075/076 will matter all that much? It's a Stens POS "ceramic" cylinder and will go on a personal saw, not a customers saw. They really should be proud of that chrome lifting inside...
  8. N

    051 No Spark Fix

    Hi All, Just acquired a new chainsaw.... an old 051 (from what I have read anyway) as it has the compression release screw above the spark plug. I am interested in a couple of photos of the Nova/Atom fix and information about the diagnosis? Have read a few things on here but a lot of the...
Back
Top