cylinder

Good evening, gentlemen! So I had this chinese top end for a 036 that I popped in there for testing purposes. And here's the result after about 2 tanks, half of which was really adjusting and playing around with different settings. In the pictures you can see that the spot where the circlip is...

I found a saw the guy said was straight gassed. It did not looked ragged and always looking for my next project i took it off his hands. Spent several days cleaning it and looking it over closely and it really cleaned up nicely. I had never owned or worked on one, since they don't have kits for...

Looking for an oem cylinder for a ms460.

I put a new cylinder and piston kit on a MS661C. One of the rings is binding so I need to take it back off to see what's going on. Trouble is, I used blue loctite (never doing that again) on the cylinder screws and now three of them won't come out. I tried a soldering iron and then a small torch...

Hi all at AS,do you think this cylinder is salvageable? It is off an early red eye 066.Damage was caused by broken OEM circlip.Both sides scored near transfers but not all the way across.Can feel it with finger nail.Would it scotch brite out? Piston is toast.Running Chinaise AM at the moment but...

As title says, looking to rid my shop of these extra parts. Pm with inquiries

My father was about to pitch a Husqvarna 254 because a salesman told him it wasn't worth it. I found straight gas in the tank (a classic little brother move), and assumed the worst for the piston, ring, and cylinder. Now that I've opened it up though it really doesn't look too bad. I'm doing the...

as per title, i'm in Australia and after 2 x stihl 031 cylinders (44mm I believe they all are) will take piston as well however can get them aftermarket so not as concerned. happy to pay reasonable international postage if necessary thanks, Sam

hi all, as per title, does anyone know where to find new cylinders for a stihl 031? Aftermarket is fine, I can't seem to find anyone that makes them. any help appreciated, or anyone want to post a used one (i'll take 2 with pistons if someone has them) to Australia? thanks Sam

Like title says looking for decomp style cylinder. No broken fins please

Looking for a good early non decomp cylinder. No broken fins

Looking for a good 064 cylinder for a decent price. As long as there are no broken fins

So I have a 2005 Jonsered 2152(Husqvarna 353) that I picked up, has some miles on it and was blowing 125psi so I figured I would put a new ring on it pull the base gasket and muffler mod it to see what it could do. Pulled the cylinder and started cleaning it up when I noticed the squish band...

hi, I bought an ms 440 in january ,it is still available in russia and I was wondering what brand of cylinder are they using now.I'm asking you this question because recently I have seen a few very fine vertical scratches inside the cylinder through the plug hole but not on the piston.It hasn't...

Yep. Don't do what I did. Stihl 192 tc about 1 year old lost a muffler screw while in use. The saw was stopped and I went to get a new screw at a nearby dealer. He kept mentioning something about the wall being so thin, but, knowing what needed to be done I just asked for a new screw please...

I'm posting to share the problem I found causing my saw not to work and no other help post I've read had this as a likely cause. As its happened to me,its real world. I run a stihl MS170 to cut firework and bought and further cheap damaged one on fleabay to fix up and take apart to learn, so as...

I have 7 6-quart cases of Mobil 1 Racing 2T for sale, (dyed red) bottles are factory sealed . Selling for $100.00 per case ($16.67 per quart) with a $25 flat shipping fee. Message me if interested. Discontinued for sale in America in 2007, this is considerably less than buying from overseas...

I have a Husqvarna 350, I am in need of a new piston and cylinder. I have read almost every recent thread about a 345-353 rebuild, 346xp swap, I don't know what to get for my little 350. I'd like to have the power of the 346xp, but would it be easier just to put a normal 350 AM cylinder and a...

Hi all, I debated if I should bump one of the 2+ year old dishwasher threads, but decided to start new as my question is pretty specific, and it isn't answered in the aforementioned threads. I'm rebuilding the top end of a 361, and this and that eventually led to me deciding to use the...

Up forsale are parts of a wonderful 031! saw ran good, just decided to tear down and sell for parts. The muffler coil are gone. Everything else is there. Case and cylinder still intact with good compression. PM if interested