husqvarna

Hello, First post here so I figure I should let you guys know what I do. I'm a faller in British Columbia, specifically logging and danger tree removal for fires around the interior. Im looking to purchase Husqvarna powerheads. I'm mainly interested in stock or modded pre-xtorq 372 or the...

I know I’m barking up that same old tree again but I have no options around here. I’m looking for a Husqvarna 2100 vented oil cap. Mine is cracked and it leaks. Even if someone had a cap that was missing the guts and gasket and chain I can re use mine. I just need the black plastic part. Willing...

Just browsing on Huztl's website and noticed the assembled MS660 and 372 clones (G660 and G372) both indicate a fuel-oil ratio of 25:1. Leads me to wonder why the big difference between Stihl & Husqvarna calling for 50:1 and Huztl using AM parts calling for 25:1. The Huztl saws are assembled...

Hi everyone I have my dads old husky chain saw. It was spray painted at one time so I cleaned it up and made it orange again. The only problem is that before I started there was no Id tag and no stickers on the saw. I need to know what the heck model number it is and cc size without tearing the...

Hi I’m looking for a tin non light up Stihl dealer sign. One sided or both sided. Willing to pay for shipping also. I included a picture of what I’m looking for. I have a big husqvarna flag that is one sided I picked up a number of years ago and would be willing to trade. It is about 8 ft wide...

1. Husqvarna 350-complete and runs good. PHO $175 OBO 2. Stihl MS 290-complete and runs good. Comes with 18" Stihl bar and chain. $225 OBO 3. Husqvarna 51-complete and runs good. Has a meteor piston. Comes with 20" husqvarna bar and chain. $150 OBO 4. Husqvarna 570-missing top cover, clutch...

So a local guy has the 372 for sale he had a 395 he sold last week. We were talking chainsaw Mills. So he hits me up today and says I have a 372 for sale. Some of you that know me... know I don't like (avoided) Husqvarna because my old man ran them but I think for $300 I might just have to get...

Selling my Husqvarna 338XPT saw. It is in excellent condition, but needs a tune up. This saw has barely been used as you can see from the photos. $300 OBO I am selling the rest of my gear as well including (listed separately): Size Medium Sherrill saddle setup (flipline, prusik line and...

FS: Extremely low hour 1997 Jonsered 2065. All OEM no modifications. Has a standard 7pin PowerMate sprocket, pre-1998 EPA Zama C3M-2B carb, single felling spike, OEM muffler in perfect condition. This is a large mount saw and has the front chain tensioner which can easily be swapped to a side...

Just bought this 281xp and I am wondering what is not original on it. According to the tag it is an 87 Is the black handle supposed to be on this saw The chain brake cover is aftermarket, can these be got still in oem as a complete unit Also the fuel and oil caps are wrong but what should...

I have a 288xp I would like to use for milling. My current dilemma is rather I should just use 36" bar with it, which won't max out my 36" Alaskan. Or if the saw would be able to run a 42" bar which would allow me to use the full 36" of mill. I am worried I will be asking too much of the saw.. I...

2000 model year 372xp oe. I went through this saw top to bottom. 100% OEM saw. New rings while I had apart. Bearings are good. Full wrap and big dogs. New air filter, spark plug, top filter cover, bar studs, rim sprocket. Carb rebuilt with Walbro kit. Muffler modded the original exit hole...

Im looking for the plastic air filter cover and the side cover on the bar side

Does anyone have any good used 385xp cases available for sale? Thanks in advance! Justin

Have some various parts saws for trade or sale . I’m in need of some 288 xp parts

Husqvarna 545 fully rebuilt from the crank up with all NEW OEM parts. Cylinder, piston, ring, bearings, seals, case gaskets, lines, filters, clutch drum, oil worm gear, .325/7T sprocket, spark plug, etc. Pressure and vac tested 100% using OEM Husqvarna block-off plates. I have video of it...

Husqvarna 545/550xp cylinder in excellent condition no transfer, scoring, or other damage. It still has the cross hatching in the cylinder from the factory. P/N 577 76 47-06 Also fits Jonsered CS2252/2253 $50 Shipped

Updated: 2014 Husqvarna 372XP XT. Starts and runs missing choke lever. Missing a few screws (1x on top cover & 1x on muffler bracket). Compression is ~140psi cold, the piston is worn, but isn't scored. This saw will make someone a great work saw or backup saw with a bit of minor maintenance. New...

Husqvarna 359 all OEM. Now has the upgraded metal intake clamp and gasket delete with a factory muffler modified to dual port. Clean and nice oils and runs great. $275 shipped to ConUS not including anyone in PST (PM for detailed shipping quote). If you have any questions just let me know!

Husqvarna 372XP OE converted to XPW (75cc) using brand new OEM Mahle P/C. Gasket delete and front ported muffler with full wrap bars and west coast spikes SEM unlimited (black) coil. $575 shipped in the ConUS unless in PST (contact me directly for exact shipping quote. PM if you have any questions.