Want to Buy 025 bar and chain

[basspapaw]

Im looking for a 025 bar and chain
.325 is all i can read on sprocket
thanks

 

[Jon1212]

Im looking for a 025 bar and chain
.325 is all i can read on sprocket
thanks

I've got about 6 of these. They are 16" 325 063 67dl. I don't have chain for them though.

 

[basspapaw]

View attachment 403826
I've got about 6 of these. They are 16" 325 063 67dl. I don't have chain for them though.

If that will work im interested how much

 

[chainsawman2011]

View attachment 403826
I've got about 6 of these. They are 16" 325 063 67dl. I don't have chain for them though.

that is not the correct bar for the 025 wrong slot width and drive link count that bar would fit 024/026/029 ect. a 16" for the 025 is only 62 dL .325 .063. if you still need one I have a used 18" and new ones in 16" and 18" pm me for more info

 

[basspapaw]

that is not the correct bar for the 025 wrong slot width and drive link count that bar would fit 024/026/029 ect. a 16" for the 025 is only 62 dL .325 .063. if you still need one I have a used 18" and new ones in 16" and 18" pm me for more info

I tried to start a conversation but I dont know if it worked I am interested in the 18 inch and the new 16 inch thanks chuck

 

[Jon1212]

that is not the correct bar for the 025 wrong slot width and drive link count that bar would fit 024/026/029 ect. a 16" for the 025 is only 62 dL .325 .063. if you still need one I have a used 18" and new ones in 16" and 18" pm me for more info

Thanks for the information. The Stihl mounts are a little more confusing than other manufacturers..

 

[drf255]

The back of the 025 bars is open.

 

[Jon1212]

The back of the 025 bars is open.

Thanks, I looked it up (S174), and it's also an 8.2mm slot.