Brian13
Addicted to ArboristSite
I have checked, double checked, and triple checked everything and I am 99% certain its not an air leak. Put everything together this morning and started it up, and at first it would just bog when you hit the throttle and stall out if you tried to feather it. I leaned the high out about a 1/16 of a turn and let is idle for a sec and the it would let you hit the throttle if you feather it. After a few more seconds it would throttle up fine. At this point I am starting to think the carb may be bad over everything else. I have no clue why the saw went out of service to begin with, and the owner dosnt remember either. It has a wt-194 on it, anybody seeing anything different than what I am seeing?