026 with a full wrap...and big dogs

[wyk]

[video=youtube;wdZ3Xm-46cQ]http://www.youtube.com/watch?v=wdZ3Xm-46cQ[/video]

I say if someone is going to make a pretty good saw nearly useless, Go Ahead and Go All the Way!

NEEDS a 32" bar fo sho!

 

[madhatte]

Dig the wrap... not sure about the dawgs. Would be plenty handy with the standard little one on there and a 16" bar. Kinda sets the handle back, though. Another inch or so forward so yer mitts don't get in each other's way would be very nice indeed.

 

[Jacob J.]

There's a kid down the road from me that put a 9" lift and 44" Super Swampers on his 1989 Toyota. It didn't make that machine anymore useful either.

 

[Naked Arborist]

There's a kid down the road from me that put a 9" lift and 44" Super Swampers on his 1989 Toyota. It didn't make that machine anymore useful either.

Hate to see those fenders :msp_w00t:

Worlds best looking 26 on roids lmao looks good though

 

[Tzed250]

There's a kid down the road from me that put a 9" lift and 44" Super Swampers on his 1989 Toyota. It didn't make that machine anymore useful either.

I can hear the U-joints screaming from here.

 

[Zombiechopper]

[video=youtube;wdZ3Xm-46cQ]http://www.youtube.com/watch?v=wdZ3Xm-46cQ[/video]

I knew that saw was going to show up. First, it's been bored out and re plated so it;s not even 50cc any more.

Second, even heavily worked over it was damn slow work cutting that tree with it!

Anyways, wrap on the 260 is ugly. Not because of the wrap, but because 260's are ugly. All of em. They are just ugly saws. That big gap in the plastic. That funny recoil cover. All of it. Just ugly.

 

[mile9socounty]

I would own and run that ugly saw. Keep the 3/4 Wrap on it but ditch the 4 points. Go with the smaller set of dual dogs. Roller catch and all.

 

[OlympicYJ]

Theres times I've wished the 260 dawgs were meatier and for a 3/4 wrap. For the most part the wrap would be overkill but I could see having more of a falling style set of dawgs...

 

[Stumpys Customs]

May not be all that practical, but I like it.

 

[Muffler Bearing]

Looks Great!

Didn't know the 026 pro only had 1 Carb adjustment screw?

i

 

[OH_Varmntr]

Anyways, wrap on the 260 is ugly. Not because of the wrap, but because 260's are ugly. All of em. They are just ugly saws. That big gap in the plastic. That funny recoil cover. All of it. Just ugly.

Blasphemy! :msp_scared:

 

[Trx250r180]

Looks Great!

Didn't know the 026 pro only had 1 Carb adjustment screw?

i

the big hole is idle speed ,the 3 little holes above it are the h and l screws ,the pro normally had just an h screw ,on mine i bought an early carb with h and l and it runs way better now

 

[Adam Smith]

Im curious where the wrap handlebar came from and or what it was supposed to fit.

 

[milkman]

I don't know that it's practical, but that's a good looking saw although I do agree with zombiechopper, why did they put that ugly gap in the cover of the 026/260s?

 

[Trx250r180]

Im curious where the wrap handlebar came from and or what it was supposed to fit.

it looks like they modded an aftermarket 044 wrap that madsons used to sell

 

[roberte]

That's a 3/4 wrap.

Why do you need big dogs on a 50cc saw (subbing for ST)??

Well it was probably a want item.
I can see why, so the dogs catch something. I have a couple of small saws that I took off the small ones and put on the big ones. Its just me, but in the type of wood I am up against the big dogs work, the bottom hook on the small dogs just dont cut it.

 

[snowdingo]

Where is the skip chain?

 

[wyk]

I knew that saw was going to show up. First, it's been bored out and re plated so it;s not even 50cc any more.

Second, even heavily worked over it was damn slow work cutting that tree with it!

Anyways, wrap on the 260 is ugly. Not because of the wrap, but because 260's are ugly. All of em. They are just ugly saws. That big gap in the plastic. That funny recoil cover. All of it. Just ugly.

I've seen people take longer to bring down a 4' tree with much larger saws on here

You're right, tho - that is a hell of a 346.

 

[woodyman]

I knew that saw was going to show up. First, it's been bored out and re plated so it;s not even 50cc any more.

Second, even heavily worked over it was damn slow work cutting that tree with it!

Anyways, wrap on the 260 is ugly. Not because of the wrap, but because 260's are ugly. All of em. They are just ugly saws. That big gap in the plastic. That funny recoil cover. All of it. Just ugly.

Its nice to have one ugly one hanging around:hmm3grin2orange:

 

[woodyman]

Wrong one,this is the ugly one.