You guys helped me with my 011, so here goes....
Got this 026 at flea mkt for $50. very clean with 20" bar....changed spark plug (and checked for spark)....did compression test using starter cord method (saw dropped slowly), cleaned air filter, checked H & L (backed out 1 turn)...put in fresh fuel, choked it, but no start ...pull cord is only about 28" long (should be 37", but I will change that if I ever get it to run)...checked exhaust screen and took it off (but it was not clogged at all)......fresh mix..... I also took off air filter and sprayed wd40 down carb, but still wouldn't fire....so any thoughts out there?
Got this 026 at flea mkt for $50. very clean with 20" bar....changed spark plug (and checked for spark)....did compression test using starter cord method (saw dropped slowly), cleaned air filter, checked H & L (backed out 1 turn)...put in fresh fuel, choked it, but no start ...pull cord is only about 28" long (should be 37", but I will change that if I ever get it to run)...checked exhaust screen and took it off (but it was not clogged at all)......fresh mix..... I also took off air filter and sprayed wd40 down carb, but still wouldn't fire....so any thoughts out there?