Want to Buy 064/ 066 muffler front?

[rupedoggy]

I built an 066 and then got a muffler front and now it does not fit correctly. The muffler back is straight across the bottom and the muffler fronts I have found are all kicked up a little and there is a gap at the bottom of the cover that lets the exhaust out. Need a straight one. Maybe this is an old 064 style. I don't know. Mike

 

[fearofpavement]

A pic would help in this situation. What your muff body looks like and the pic of the cover that doesn't fit right. Otherwise you may wind up with another of what you already have. I think I have some 066/MS660 fronts but not sure if it's what you need...

 

[rupedoggy]

OK thanks for trying to help. Here is the picture. The inside bottom is straight across the outside shell. The outside one (also in the picture) I have is not. It leaves a gap and the exhaust can come right out the bottom of the muffler.

 

[TysonH]

I came across your ad while I was surfing between Ebay and saw this one. It looks like what you're after, it looks factory too, no china junk.

http://www.ebay.com/itm/USED-STIHL-066-064-MUFFLER-FRONT/191934059085?_trksid=p2047675.c100005.m1851&_trkparms=aid=222007&algo=SIC.MBE&ao=1&asc=20131003132420&meid=a8398243894143ccb3ae2d922239c44d&pid=100005&rk=1&rkt=6&sd=361660603745

And btw, hello to neighbor to the county south of you! (amador)

 

[rupedoggy]

Thanks. That is the one all right. Mike on 49, three miles south of Poor Reds.

 

[TysonH]

Traveled that way many times, were on the county line of the south fork nearest to Plymouth. Did poor reds reopen ? Good to meet ya and good luck with your project saw it looks good!