241c , 261c , 362c adapter for K/N filter

Treestuff
Wesspur
shop deals on amazon
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Who is this guy Jack and what does he have to do with Rizzo?
Frank, do you port saws yourself or make bolt ons for saws like your chain and intake? I’m looking to have a saw ported and I figure I’ll give you a shot. If your stuff is as good as you say it is it will quiet all this banter down.
What do you charge to port a saw?
 
Jed1124 said:
Who is this guy Jack and what does he have to do with Rizzo?
Frank, do you port saws yourself or make bolt ons for saws like your chain and intake? I’m looking to have a saw ported and I figure I’ll give you a shot. If your stuff is as good as you say it is it will quiet all this banter down.
What do you charge to port a saw?
Click to expand...
This is going to get very awkward trying to get an answer out of him
 
Jed1124 said:
Who is this guy Jack and what does he have to do with Rizzo?
Frank, do you port saws yourself or make bolt ons for saws like your chain and intake? I’m looking to have a saw ported and I figure I’ll give you a shot. If your stuff is as good as you say it is it will quiet all this banter down.
What do you charge to port a saw?
Click to expand...
He will need to call you back, after he talks to hotsaws.
 
Jed1124 said:
Who is this guy Jack and what does he have to do with Rizzo?
Frank, do you port saws yourself or make bolt ons for saws like your chain and intake? I’m looking to have a saw ported and I figure I’ll give you a shot. If your stuff is as good as you say it is it will quiet all this banter down.
What do you charge to port a saw?
Click to expand...
I got some inside info here...
Jack is a lifetime member of the JackOffs Anonymous **** I think he's the president.
Frank's got a hardon for him since the begining of his meetings. He will probably get back to you after their meeting.
 
CHOP...CHOP... said:
Hey @flabZ is frank Photo shopping again FFS...
Look at the corner right side. Bark wtf is bark doing in the laundry room..
I really need a joint ..
Click to expand...
Yeah nothing is his, it’s all stolen photos. That pic is from over seas, no emission sticker even on the handle. He will claim his imaginary friend sent him the picture when in reality he just swiped it off the net. Typical rizzo jizzo wizzo bullchit. I’m workin on getting him banned so stay strong brother, he will be homeless soon
 
flabZ said:
Yeah nothing is his, it’s all stolen photos. That pic is from over seas, no emission sticker even on the handle. He will claim his imaginary friend sent him the picture when in reality he just swiped it off the net. Typical rizzo jizzo wizzo bullchit. I’m workin on getting him banned so stay strong brother, he will be homeless soon
Click to expand...

You mean he doesn’t really port saws?
 
Jed1124 said:
You mean he doesn’t really port saws?
Click to expand...
He admitted to me in an answer to a post in the best 40 cc saw Bull***te thread that he does no work on his 'batman turbo super saws just buys in a modded saw & bullshits it as reworked by him & you get a ported saw by one of his mates at a highly inflated price over what you would have paid his mate or most of the reputable "madders"anyway My take go to a reputable Modder
 
Little Al said:
He admitted to me in an answer to a post in the best 40 cc saw Bull***te thread that he does no work on his 'batman turbo super saws just buys in a modded saw & bullshits it as reworked by him & you get a ported saw by one of his mates at a highly inflated price over what you would have paid his mate or most of the reputable "madders"anyway My take go to a reputable Modder
Click to expand...
You’re full of beans little-al ! I build/modify the Saw myself guy - don’t know where you are getting your info from about me buying ported saws from another builder and selling them for inflated prices ! Total hogwash ! Hey Al - isn’t tonite buy one / get one Fosters beer at the local watering-hole ? Me thinks ya need a check -up from the neck -up sir ... JAFA !
 
Jed1124 said:
Who is this guy Jack and what does he have to do with Rizzo?
Frank, do you port saws yourself or make bolt ons for saws like your chain and intake? I’m looking to have a saw ported and I figure I’ll give you a shot. If your stuff is as good as you say it is it will quiet all this banter down.
What do you charge to port a saw?
Click to expand...
Yah , shoot me a pm
 
Just call Jack, save yourself some time/dough. All builders on these sites show there work, rizzo just shows saws running. He claims he doesn't want to show his porting because other builders will steal his skills. Like anybody can tell exactly how much he took off a port by looking at a picture. Maybe his grinding skills are so bad he can't post pics and still claim to be a stihl specialist? That makes sense. I don't post/put up pictures of cylinders/pistons because I'm not a builder, like rizzo. I'm pretty sure Jed is just messing w/ rizzo tho, nobodys dumb enough to send even a hand saw to rizzo.
If he didn't pollute this website w/ his bullchit I wouldn't say anything.
 
NeSurfcaster said:
Just call Jack, save yourself some time/dough. All builders on these sites show there work, rizzo just shows saws running. He claims he doesn't want to show his porting because other builders will steal his skills. Like anybody can tell exactly how much he took off a port by looking at a picture. Maybe his grinding skills are so bad he can't post pics and still claim to be a stihl specialist? That makes sense. I don't post/put up pictures of cylinders/pistons because I'm not a builder, like rizzo. I'm pretty sure Jed is just messing w/ rizzo tho, nobodys dumb enough to send even a hand saw to rizzo.
If he didn't pollute this website w/ his bullchit I wouldn't say anything.
Click to expand...
Yah , not interested in showing pics of work sir , that info can stay behind the shop walls thank you very much... if one has ANY knowledge of 2-stroke performance at all they will clearly HEAR the sound / tone of the Saw ... some have it some do not ... Here’s a hot - woods ported 362c with my machined adapter and K/N filter ... balls galore my friend and LISTEN to the sound ! That’s a hot-woods ported saw that will make quick work of any cutting tasks you require and more importantly use very little fuel compared to the “competition” ... You can continue with your nonsense as long as you wish but the Saws speak for themselves! Out !!!
 
Mike Hunterts said:
I tried to buy an adapter from Gary, was given the runaround, and around, and around.

All sizzle no steak.
Click to expand...
Yah , I’ve decided to sell them as a kit - thank you for your interest, don’t cost nothing to go fishing lol
 

Latest posts

Back
Top