What you mean is......You can be stupid.When you’re payin my bills you are the boss ! Least I didn’t leave the key in the chuck !
Ok pal ... right now you are pissing in the wind as far as I’m concerned k ? If you do not have 2019 chainsaw-application-specific oiled filter (whether KN Uni or Max flo)links then please go play in another sandbox ... obviously You just don’t get it / want to learn and Uncle Bugs grows weary of your repetitive posts ... tell ya what —- you are absolutely correct ! Now please go do something productive!!!I already posted a bunch of links earlier and you refused to look at them.
Along with a wrist watch or any jewelry like items hanging loose off the neck or wrist.Long sleeves running a lathe......day off without pay.
Thank you sir for today’s lesson in proper PPE ! I will roll up my sleeves ! Apparently you don’t have much machine-shop experience in regards to the chuck / key ... with a sufficiently robust machine leaving one in the chuck can KILL you or a bystander ... I have a small “hobby lathe” that will blow the breaker long before it wood ever make 3” radius bends in the bones of my arm , in fact it stalls / trips very easily ..... by designWhat you mean is......You can be stupid.
Leaving the key in the chuck usually just hurts the lathe.
And explain that to the surgeon as he goes into rebuild your arm.
“Oh....you didn’t leave the key in the chuck....well okay then you know what you are doing”
A sleeve caught means you get your arm wrapped around the chuck as the lathe pulls you into the chuck. Making 3” radius bends in a he bones of your arm.
The lathe is an equal opportunity destroyer. It has no conscience.
Go ahead......trying to help.
Ok pal ... right now you are pissing in the wind as far as I’m concerned k ? If you do not have 2019 chainsaw-application-specific oiled filter (whether KN Uni or Max flo)links then please go play in another sandbox ... obviously You just don’t get it / want to learn and Uncle Bugs grows weary of your repetitive posts ... tell ya what —- you are absolutely correct ! Now please go do something productive!!!
Thank you sir for today’s lesson in proper PPE ! I will roll up my sleeves ! Apparently you don’t have much machine-shop experience in regards to the chuck / key ... with a sufficiently robust machine leaving one in the chuck can KILL you or a bystander ... I have a small “hobby lathe” that will blow the breaker before it wood ever make 3” radius bends in the bones of my arm , in fact it stalls / trips very easily ..... by design
I KNOW it will ! After all I wired a 3amp breaker BEFORE the 10amp fuse ! Never can be too careful around 1/10hp motors ..besides I don’t plan on testing your theory anytime soon!. In fact I wood be FAR more concerned about operating 4,5,6,7,8,9 hp chainsaws than your scenario! And I don’t wear chaps when I cut either ... a man knows what he needs so all the safety-Crats can chill out already !Hole up. You think your lathe will trip a breaker before it will break your arm?
I meant to say, thanks for pointing the long sleeves out to me. Sometimes one gets relaxed about safety issues and that’s when accidents happen. I will remind my self not to do this, thankyouHole up. You think your lathe will trip a breaker before it will break your arm?
Reel it back in frank, your doing goodI KNOW it will ! After all I wired a 3amp breaker BEFORE the 10amp fuse ! Never can be too careful around 1/10hp motors ... In fact I wood be FAR more concerned about operating 4,5,6,7,8,9 hp chainsaws than your scenario!
I meant to say, thanks for pointing the long sleeves out to me. Sometimes one gets relaxed about safety issues and that’s when accidents happen. I will remind my self not to do this, thankyou
40 years in the trade.Thank you sir for today’s lesson in proper PPE ! I will roll up my sleeves ! Apparently you don’t have much machine-shop experience in regards to the chuck / key ... with a sufficiently robust machine leaving one in the chuck can KILL you or a bystander ... I have a small “hobby lathe” that will blow the breaker long before it wood ever make 3” radius bends in the bones of my arm , in fact it stalls / trips very easily ..... by design
Hey man, when I zoom in on that yellow box on that table, it says something but I can’t make out what it says?View attachment 695058
40 years in the trade.
I saw a guy stick the key in the cabinet.
But on a decent size lathe you are down by the end of the work
Not by the chuck where the key ischemic you turn it on.
That’s why I said it USUALLY Does more damage to the machine.
On our machines the chuck is a 2 hand deal.
When in trade-school the chuck key was spring loaded such that you had to push it in to engage and it wood pop back up - maybe should be standard equipment eh ? Worked at a shop where a guy was grinding indexable inserts in a Blanchard - grinder ... He was being scolded by the super about production and “forgot” to turn on the magnet ! Talk about friendly fire ! Inserts were flying everywhere along with the ungodly sounds emanating from the machine ... never seen him again at that shop but ran into him at the tavern ! He said he was starting another job the following Monday and gave the super a little “going away “ present ... the super WAS an asshat for sure !View attachment 695058
40 years in the trade.
I saw a guy stick the key in the cabinet.
But on a decent size lathe you are down by the end of the work
Not by the chuck where the key ischemic you turn it on.
That’s why I said it USUALLY Does more damage to the machine.
On our machines the chuck is a 2 hand deal.
Don’t know if someone was trying to kid you but carbide inserts aren’t magnetic enough to put on a Blanchard grinder.When in trade-school the chuck key was spring loaded such that you had to push it in to engage and it wood pop back up - maybe should be standard equipment eh ? Worked at a shop where a guy was grinding indexable inserts in a Blanchard - grinder ... He was being scolded by the super about production and “forgot” to turn on the magnet ! Talk about friendly fire ! Inserts were flying everywhere along with the ungodly sounds emanating from the machine ... never seen him again at that shop but ran into him at the tavern ! He said he was starting another job the following Monday and gave the super a little “going away “ present ... the super WAS an asshat for sure !
Really? The company has been doing it that way for 30yrs ! They had a template and the inserts were placed in the openings - this was to grind the thickness ! The cutting edge was done on a cam - grinding machine - I know this for a FACT ! Worked there for about 6mo before I got tired of the bullDon’t know if someone was trying to kid you but carbide inserts aren’t magnetic enough to put on a Blanchard grinder.
And I have never seen a Blanchard with diamond blocks.
Seen a 300” one........but not for carbide.
Most inserts are ground on 5-axis CNC grinders.
Used to be a member here who did it for a living.
Don’t know.
Enter your email address to join: