mike axtell
ArboristSite Lurker
previuos post was moved?? not sure why or what happened??/
My 357xp is having a problem. It starts a little hard but when idleing it is fine for about 20-30 seconds then the problem begins.
It begins to race chain starts to turn.. Then when you hit the accelerator to bogs out and dies.
I have changed the spark plug, air filter and fuel filter.
I have set the idle to 2800 (L). Set the H as out lined and the high idle set so it has a goo high end.
I don't think it's the settings.... But could be.
The saw did the same thing prior in the woods and I thought it was possible fuel filter..
Need some help with the bogging and racing at point of acceleration.
You sometimes can feather the throttle into full rpm range and saw.
It then requires a choke to restart after bog and stall
Thanks
Mike Axtell
My 357xp is having a problem. It starts a little hard but when idleing it is fine for about 20-30 seconds then the problem begins.
It begins to race chain starts to turn.. Then when you hit the accelerator to bogs out and dies.
I have changed the spark plug, air filter and fuel filter.
I have set the idle to 2800 (L). Set the H as out lined and the high idle set so it has a goo high end.
I don't think it's the settings.... But could be.
The saw did the same thing prior in the woods and I thought it was possible fuel filter..
Need some help with the bogging and racing at point of acceleration.
You sometimes can feather the throttle into full rpm range and saw.
It then requires a choke to restart after bog and stall
Thanks
Mike Axtell