My 365 seems to be pooling gas when it sits between cuts. As soon as I pick it up it bogs until it either quits or I hit the gas. Not sure if thats it just my guess. Any ideas? Also sometimes in smaller stuff it four strokes hard until I really push it. Little leaner?
365xt Problem
- Thread starter BlueHills
- Start date
Help Support Arborist Forum:
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,167
It could be several things-
start with checking the L needle setting- should be about 1 turn out from lightly seated.
check the metering lever setting. It should be flush with the top of the carb body.
the diaphragms may be getting stiff and need replacing.
start with checking the L needle setting- should be about 1 turn out from lightly seated.
check the metering lever setting. It should be flush with the top of the carb body.
the diaphragms may be getting stiff and need replacing.
l could be very wrong but my thoughts are the L screw needs adjusting to give it more fuel not less. Either way l think tuning the L may solve your issue. Good luck!
