trappermike
ArboristSite Guru
Your squish should end up close in the low 20's,but because of different engine production variants it will differ but it's usually pretty close to ideal,if you're fanatical about final squish gap you can simply alter the base gasket thickness. The Dominant piston is the same style as stock(I just saw),so I'm not interested in it,but the Hyway pistons sound ok IF they are OEM quality,I'm wondering if they are just stock pistons with the mod done,if so they would be great,maybe save you a few bucks on machining.What is the dome height,I specify .040"(1mm) on mine. Although some may think it petty,I like my piston domes polished,they run cooler and of course resist carbon build up,if it's not done you can do it yourself at home with a little elbow grease.
I would not recommend modifying a Meteor or or aftermarket replacement piston,they use an inferior aluminum alloy that does not come close to OEM in hotstrength or % of silicon,nor will I use aftermarket rings in a ported engine.
I would not recommend modifying a Meteor or or aftermarket replacement piston,they use an inferior aluminum alloy that does not come close to OEM in hotstrength or % of silicon,nor will I use aftermarket rings in a ported engine.