i bought this low hour power heads to start some double power head milling
its been sitting in my store for quite sometime now, i dont think
i'll ever have time to venture milling anytime soon
1. saw with striped decal, had a little more run time. pulled the muffler and checked
cylinder is very clean should break in with couple more tanks, piston is almost broke in. mild deposit on exhaust port
2. this 1 might have less than 5 tanks, there's still machining mark on the cylinder
both piston&cylinder are squeaky clean. no carbon at all
looking for USD 850 for saw no.1 and USD 900 for saw no.2(include shipping)
i encourage if you guys can take this combo to one address, that way i can save shipping
and i will let go a new starter+clutch cover decal for free and an option of 28"(new)+30"(slightly used) b&c
with just USD 100 top up
its been sitting in my store for quite sometime now, i dont think
i'll ever have time to venture milling anytime soon
1. saw with striped decal, had a little more run time. pulled the muffler and checked
cylinder is very clean should break in with couple more tanks, piston is almost broke in. mild deposit on exhaust port
2. this 1 might have less than 5 tanks, there's still machining mark on the cylinder
both piston&cylinder are squeaky clean. no carbon at all
looking for USD 850 for saw no.1 and USD 900 for saw no.2(include shipping)
i encourage if you guys can take this combo to one address, that way i can save shipping
and i will let go a new starter+clutch cover decal for free and an option of 28"(new)+30"(slightly used) b&c
with just USD 100 top up
