Canton
ArboristSite Member
Just received the 562xp I ordered and have a quick, or hopefully quick question about setting the autotune on first run. Most of what I've read so far instructs you to cut a thick log at full throttle for the first 3 to 5 min for the carb to adjust itself. This matches what I found in the manual I got online as well.
The manual that came with the saw (printed 10/19/2015) simply tells you that the saw will adjust itself after a few fuelings at normal running. High speed will be set during loaded running and idle is set when the saw idles for some time.
Any suggestions on which procedure i should follow or if it matters ?
Thanks.
The manual that came with the saw (printed 10/19/2015) simply tells you that the saw will adjust itself after a few fuelings at normal running. High speed will be set during loaded running and idle is set when the saw idles for some time.
Any suggestions on which procedure i should follow or if it matters ?
Thanks.