A few pictures of an oak mantle in the works!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
chevytaHOE5674

chevytaHOE5674

ArboristSite Operative
Joined
Feb 6, 2007
Messages
454
Location
UP Mi
Hey guys a few weeks back a friend, my brother and I cut up a 30+" red oak that had blown over a few years back. I wish i had before pictures because the log was huge. My brother wants the slab for a mantle in his new house. Lots of work to move it around without the tractor but it looks to be worth it. 85* day, luckly there was a breeze off the lake.

The saws, 066 and 32" bar on the mill, and 361 for some trimming and other cutting.
dscn2151.jpg

dscn2157.jpg

dscn2156.jpg


The log with straight edge,
dscn2152.jpg

dscn2153.jpg

dscn2154.jpg
 
chevytaHOE5674

chevytaHOE5674

ArboristSite Operative
Joined
Feb 6, 2007
Messages
454
Location
UP Mi
Finished up and ready to dry for a few more years before we resaw it and plane it down.
dscn2155.jpg

dscn2160.jpg

dscn2161.jpg


Got a few boards out of it also but didn't get many pictures.
dscn2147.jpg
 
woodshop

woodshop

Addicted to ArboristSite
Joined
Dec 13, 2004
Messages
2,641
Location
Fort Washington PA
Make sure cants that size dry real slow... something that large usually develops a few large cracks here and there as the outside dries faster than the inside can, nature of the beast. Nice lookin cant though, beautiful hunk of wood. Thanks for posting.
 
chevytaHOE5674

chevytaHOE5674

ArboristSite Operative
Joined
Feb 6, 2007
Messages
454
Location
UP Mi
Thanks, it already has 1 crack in it, but it should be at the back. I figure a few years in the garage and it will be good and dry, about the time his house is ready for a mantle.
 
Adkpk

Adkpk

Addicted to ArboristSite
Joined
May 16, 2006
Messages
3,189
Location
NYC or Catskill Mountains, NY
A friend of mine has several oak post and beams that hold up his house. They are all exposed only ten years old and have quite a few fat cracks. I think it adds to the character of the house. :clap: Nice job and nice view.
 
hazard

hazard

ArboristSite Operative
Joined
Jun 26, 2008
Messages
200
Location
Madison WI
Cool pics. Milling is just a blast!!

You might want to think about sealing the logs on the flat parts where you think you will have cracks with end grain sealer. I would think this would slow the drying process some on the flat grain.

Is your mill homemade. I have a granberg with a 36" bar. Looking at mine, I could of made it from scrap very easily.

Thanks for the pics. It inspires me to blow the dust off of my mill and get out and make some boards.

Chris
 
irishcountry

irishcountry

ArboristSite Guru
Joined
Jan 12, 2007
Messages
595
Location
Brooklyn Mi.
Very nice!! I was just up your way on the 4th of July our friends have a cottage up there, Houghton is beautiful we hung out at "the island" with the kids and they had a blast! Looks like alot of wood and it would make a very nice mantle.
 
Backwoods

Backwoods

ArboristSite Operative
Joined
May 18, 2008
Messages
448
Location
Camas Valley Oregon
This is a Myrtlewood block, which I cut the pith out of. As you can see by the crack on the end that it did not relieve all the stress but enough stress was relieved to control the cracking. This block was sealed and left for a year then sent out to the kiln to finish drying and to kill the powder post beetles. The three sides were then remilled and the block was cut length wise twice to produce three 4"x 8"-10" eight foot long mantles with live edges. I do not have any pictures of them after this stage to post.

After your mantle dries, it may be necessary to remill the edges to square it up again.


attachment.php
 
Top