A Tale of Two 361s

[buzz sawyer]

Now it's just getting pitiful......

How about Shakespeare

" For What Is A Husky, But A Stihl Yearning To Be"

HAHA - I thought Husky would be "Much Ado About Nothing"

 

[440rev]

where do u get the wrench holder or what model saw are those off of?

 

[windthrown]

You do not need to tape the throttle interlock down. All you have to do is flip the little spring out of the lever where it clips in and it will stay down. To do that, just pull the black top of the handle up and pull the spring out and move it to the other side of the lever. Then snap the black top back in place.

Not that I would ever RECOMMEND that anyone do anything like rig a safety lever on a saw and run it... this is just a possibility in the case that you need to remove the interlock for temporary hypothetical reasons.

And good choice on having two 361s!!! For the Ebay price of the blown one, that is still a good deal.

 

[forestryworks]

I m not here to piss on your cheerios, but taping the throttle interlock down might bite you bad someday. That is a wonderful safety feature and is so easy to make work right its crazy. Nice saw by the way!

+ 1

a stick will poke in the throttle area and hit the throttle

i've seen it happen

 

[windthrown]

where do u get the wrench holder or what model saw are those off of?

Bailey's has them for cheap:

http://www.baileysonline.com/itemdetail.asp?item=17270&catID=288

 

[440rev]

Thanks

Bailey's has them for cheap:

http://www.baileysonline.com/itemdetail.asp?item=17270&catID=288

 

[777ER]

where do u get the wrench holder or what model saw are those off of?

Tool holder #1128 891 8600
Costs about $5

came from the 440R saw.