an (new to me) old mini mac:-)

[ckelp]

an (new to me) old mac

well i don't think it's a mini mac :msp_sneaky:
dose anyone have a cluch cover or tilly hl63?
can you guess this saw??
<a href="http://s1259.photobucket.com/albums/ii555/ckelp/?action=view&amp;current=2012-09-16_18-13-55_472.jpg" target="_blank"><img src="http://i1259.photobucket.com/albums/ii555/ckelp/2012-09-16_18-13-55_472.jpg" border="0" alt="Photobucket"></a>

<a href="http://s1259.photobucket.com/albums/ii555/ckelp/?action=view&amp;current=2012-09-16_18-14-36_157.jpg" target="_blank"><img src="http://i1259.photobucket.com/albums/ii555/ckelp/2012-09-16_18-14-36_157.jpg" border="0" alt="Photobucket"></a>

<a href="http://s1259.photobucket.com/albums/ii555/ckelp/?action=view&amp;current=2012-09-16_18-14-41_966.jpg" target="_blank"><img src="http://i1259.photobucket.com/albums/ii555/ckelp/2012-09-16_18-14-41_966.jpg" border="0" alt="Photobucket"></a>

 

[67L36Driver]

Is that one of them go-kart motors I been seein' on ebay?:msp_rolleyes:



Sorry, no cover here. Cool find!

 

[ckelp]

delivered a saw to a guy, get to taken he pops out a little stihl 015l and this hog, its a 660 with a 2:1 gear drive..
it's going to need a new carb, it has a flatback with the primer..

dampen gas down the carb it sound good i so want to rig up a cover for it and see what it can do with a 28" bar i know that bar is 44" too short...

 

[Justsaws]

Very nice.

 

[Eccentric]

That's a great score Dave. You'll be impressed with the saw once you swap in an HL63 and put a long bar on it. Here's my 650. Took these pics today as we were texting back and forth about your 'new' McCulloch.

Guess there were at least two of these old beasts being used around here. Mine was a local CL score from the son of the original owner. Swapped on the Tillotson, installed a spike set, and replaced the flywheel cover. Recently put this NOS McCulloch 32" hardnose on it. Already had the loop of 1/2" chipper. Would like to have a 43" or so bar for it. Since you don't have a chain, I'd recomend you get a .404-8 sprocket for it off of ebay.

This fellow (Bryce) had many parts from a 650/660 listed, including the clutch cover. Now he only has a few parts (such as the handle/carb box that I think came from the same saw as the cover he had listed earlier). He may well still have the cover. I suggest you contact him and ask. The clutch cover you need was only used on the 650/660 saws...

Stihl chainsaw parts, HOMELITE items in cheap chainsawparts saw parts store on eBay!

Here's the master IPL for the 650/660 saws. I hope you have your model#/serial# tag (should be attached by one of the oil tank cover screws under the AF cover).

http://www.smallenginediscount.com/Mc_650_660__Oct_70.pdf


McCulloch Page