Backyard Logging

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
slowp
Joined
Feb 6, 2007
Messages
16,202
Location
Warshington
attachment.php


We have maples dying. The local term for the disease is Maple Wilt. Wouldn't you know it, after I have a house put here, a maple dies within house reach. So, a former hooktender's son, now in the excavation business, wanted to take charge.

He just turned 18, and is a whiz on the equipment and seems to know a bit about trees too. But, as he said, things did not go as planned this afternoon. A 20 minute job turned into a 2 hour job. I took a couple of videos of the big tree going down. It was forked at the bottom. He used his 440 with a 32 inch bar, and an excavator wedge.

This is fork number 1. It hung up in a fir.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/rF-Nq3XzFzA?hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/rF-Nq3XzFzA?hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Here is fork number 2.
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/WXrqZ2B5J7M?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/WXrqZ2B5J7M?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

The last one, not videoed, also had to be coaxed down. But, as somebody here says, trees went down, nobody got hurt, and I have some firewood.

One more scary note, when I came in the house after the falling, the power was off. I immediately began to have visions of lots of dollars flowing away to electricians, but it turned out to be an area wide outage, not caused by the tree removal. Whew!
 
BarkBuster20

BarkBuster20

Addicted to ArboristSite
Joined
Mar 1, 2009
Messages
1,100
Location
Oregon
Would be a little safer not stopping so many times in the back cut...maples can and do chair.. like you said there on the ground and no ones hurt..
 
bitzer

bitzer

******** Timber Expert
Joined
Jul 21, 2009
Messages
3,867
Location
Hardwood Country
Good vids and pics. We've had a lot of Maples goin around here the last couple years too.

I used to do that a lot when I first got started. Pushing trees over while I'm in the back cut or if I was alone setting them up and gettin back in the rig to push em. Its a really easy way to break equipment and can be sketchy as hell with a guy on the controls who is not really sure what hes doing while you're on the ground sawing. I avoid using heavy equipment as much as possible now and find a better way. Good entertainment though anyway!
 
rmihalek

rmihalek

Where's the wood at?
Joined
Jan 20, 2004
Messages
2,258
Location
MA
What kind of maples grow in Warshington? We have silver, sugar, red and Norway with a smattering of ornamental Japanese maples here in Taxachusetts.
 
056kid

056kid

Addicted to ArboristSite
AS Supporting Member
Joined
Nov 10, 2004
Messages
6,634
Location
On the road
Would be a little safer not stopping so many times in the back cut...maples can and do chair.. like you said there on the ground and no ones hurt..

i dont think a limby mape like that standing straight has much of a chance of chairing. Maple really isent all that bad to begin with at least back east. They will pop fibers before they slab usually...
 
Gypo Logger

Gypo Logger

Timber Baron
Joined
Dec 8, 2001
Messages
16,788
Location
Yukon Territory
i dont think a limby mape like that standing straight has much of a chance of chairing. Maple really isent all that bad to begin with at least back east. They will pop fibers before they slab usually...

Here's a Rock Maple I chaired. Lol
I caused it when I changed my mind about the notch (refalling), and was falling in windy conditions
You can see my first undercut to the left and then my second notch to the right. It would have worked, but the wind was making the crown pretty dizzy. Lol
One shouldn't fall in high winds, but sometimes it can work to your advantage, however, it's not a good practice.
John

barberchair.jpg
 
Last edited:
bitzer

bitzer

******** Timber Expert
Joined
Jul 21, 2009
Messages
3,867
Location
Hardwood Country
Theres a big difference between the hard and soft maples. At least around here. Silver, norway, red, boxelder, i'd consider soft. Black and Sugar are rocks. They are the forest trees. I could see the hard maples chair. I've never had one do it, but if theres a good amount of head lean i'd cut it so it wouldn't anyway.

Are the Big leafs soft or hard?
 
Hddnis

Hddnis

Addicted to ArboristSite
Joined
Sep 4, 2007
Messages
3,691
Location
PNW
Maples around here are soft, unless they are a landscape tree and then you can find almost anything.

We have some oaks that will split out and chair like an alder or maple at the wrong time of year too.



Mr. HE:cool:
 
slowp
Joined
Feb 6, 2007
Messages
16,202
Location
Warshington
The wedge shown in the picture is their one for the small trees. They have one or two big ones, which are a bit harder to "pack" around. Sometimes one of the big ones is handier. Their rockpit is near my house. :clap:

I should have visited a neighbor and had him move his yarder down here. Setup would have been interesting. Nope, you can't put the yarder on the drainfield! Suburban Logging. It could be a new reality show. :dizzy:
 

Latest posts

Top