Bench grinder feature

[svk]

That’s how I came to the 60-25 setting.

I was surprised how much effort it took to blue a cutter on purpose (on a junk chain). It surprised me because so many hardware store sharpening services seem to do their best to blue your cutters. Lol.

 

[Philbert]

'No blue? Good for you'!

That’s how I came to the 60-25 setting.

Now try it in some wood!

One of the advantages of a grinder is how easy you can make, calibrated, quantitative changes in your settings. Can do that with a Granberg type file guide too, I guess.

Philbert

 

[old guy]

For both .325 & 3/8ths chain, I start out with the 1/8 cbn wheel at 50°, I only use the radius, no deeper, then if it needs more below that, I throw it on another grinder with a 3/16 wheel at 60° & clean out the gullet, makes em look like the grind on new chains. And they cut great too.

 

[Philbert]

. . .makes em look like the grind on new chains. And they cut great too.

Pics?

Thanks!

Philbert

 

[old guy]

I'll have to get some.

 

[old guy]

Got some pics of chain today, this new stiyl .325chainit is easy to see how to copy this as I said

 

[old guy]

I couldn't find a good representative of my grinding,I should have thrown it on the grinder& cleaned it up