Black Cat Performance meets the 462c

[Trent Curtis]

Yeah I saw it, like I said, pretty sad for a ported saw, especially in that soft wood

Ironic part- do you remember this guy “calling out” brads wood selection for testing his 462? And then he brings out 3 chunks of firewood..... and plenty of excuses. Not that I expected anything different.

Cutting small wood you don’t have to show the saws torque... or lack there of. all you need is RPM’s. So you can build a turd of a saw.... and look cool cutting 15” cookies.

I also noticed the lack of revving the saw before the cut..... clearly not wanting to demonstrate the saws stock WOT rpms.
You can bet that after the saw is “ported” we will see him piss rev the hell out of it in an effort to show his “gains”.

 

[dustinwilt68]

I agree, I believe this saw has a muffler mod at best. If that 362 was my saw and it was "ported" and wouldnt out run a stock 72cc saw in that small of wood that doesn't take torque, I would be getting rid of it.

 

[Frank Rizzo]

It's fairly common for a ported saw to gain atleast 25%, so it should be capae of taking care of a 72cc saw fairly easily, some builders have reported gains higher then that even.

Yah , I’m well pleased - 59 cc vs 72cc ... or 13cc less - Video proof - same wood , bar/chain ... One can make gains of 50% with an tuned - pipe but that’s not what we are trying to accomplish here

 

[Trent Curtis]

I agree, I believe this saw has a muffler mod at best. If that 362 was my saw and it was "ported" and wouldnt out run a stock 72cc saw in that small of wood that doesn't take torque, I would be getting rid of it.

Exactly- but I don’t think the Specailist here understands what we’re talking about.

He’s too busy designing those “462 specialist” stickers....

 

[Stihl 041S]

Yah , I’m well pleased - 59 cc vs 72cc ... or 13cc less - Video proof - same wood , bar/chain ... One can make gains of 50% with an tuned - pipe but that’s not what we are trying to accomplish here

But your Hot Woods port 362 could not keep up with a stock 462.
So your Hot Woods Port 362 did not make 27% more.

Please address this as you said your MM would do 30%

Or are you total BS?

 

[Mike Hunterts]

This has been fun, but the real world is calling and my mini vacation is coming to an end.

If you guys knew what I know about Gairy and his past, you'd understand why he does what he does. I've decided against outing him, but I've thrown out enough crumbs that you should be able to figure him out pretty easy.

It's apparent that he's gonna keep up the lies, and it's just not fun anymore shootin at such an easy target.

You guys have fun with the ol' FABIAN-izer. Just don't give him too many New York Hamburgs, he ain't seen his pekker since he was a baby.

 

[Del_]

These build threads are awesome!

 

[Frank Rizzo]

Ironic part- do you remember this guy “calling out” brads wood selection for testing his 462? And then he brings out 3 chunks of firewood..... and plenty of excuses. Not that I expected anything different.

Cutting small wood you don’t have to show the saws torque... or lack there of. all you need is RPM’s. So you can build a turd of a saw.... and look cool cutting 15” cookies.

I also noticed the lack of revving the saw before the cut..... clearly not wanting to demonstrate the saws stock WOT rpms.
You can bet that after the saw is “ported” we will see him piss rev the hell out of it in an effort to show his “gains”.

Yah , Brad was cutting balsa wood /cottonwood or 0hio hardwood dude - he admits as much ... I’ve seen gains of around 20% for the 462c from several “known” porters ... We shall see how this works out ! Next up for the 462c ..... muffler mod tuned exhaust ..... stayed tuned ... same “Cat” time ; same “Cat” channel

 

[Stihl 041S]

Yah , Brad was cutting balsa wood /cottonwood or 0hio hardwood dude - he admits as much ... I’ve seen gains of around 20% for the 462c from several “known” porters ... We shall see how this works out ! Next up for the 462c ..... muffler mod tuned exhaust ..... stayed tuned ... same “Cat” time ; same “Cat” channel

Never address anyone’s questions.......just spews irrelevant generalizations........

Yet you demanded others to answer your questions

 

[Trent Curtis]

I have a flight to catch myself... I’ll keep an eye on this thread as it developes. Sure to be full of lies, and erroneous claims of grandure.

If you check frank’s computer tomorrow, the search history will Contain....
“how to port a chainsaw”,
“how to tune an auto tune chainsaw”
“What is auto tune”
“what are strato Port’s”

 

[huskihl]

well a sticker will get you 40% gains instantly, wonder how much I van get outta this one.

View attachment 700715

Did that fall off the new Dodge ?

 

[Frank Rizzo]

I have a flight to catch myself... I’ll keep an eye on this thread as it developes. Sure to be full of lies, and erroneous claims of grandure.

If you check frank’s computer tomorrow, the search history will Contain....
“how to port a chainsaw”,
“how to tune an auto tune chainsaw”
“What is auto tune”
“what are strato Port’s”

Yah , good riddance to bad rubbish !

 

[Stihl 041S]

I have a flight to catch myself... I’ll keep an eye on this thread as it developes. Sure to be full of lies, and erroneous claims of grandure.

If you check frank’s computer tomorrow, the search history will Contain....
“how to port a chainsaw”,
“how to tune an auto tune chainsaw”
“What is auto tune”
“what are strato Port’s”

When I mentioned the name HotSaw101 used here on AS .....I checked where Frank was a few times and he was using the search function.
Frank didn’t even know he posted here. Lol
Danger Cat is a hell of a faller.

 

[Trent Curtis]

Yah , good riddance to bad rubbish !

Sucks when accountability comes knocking, eh?

You talked a lot of **** and made a lot of claims over on Brads build thread, Frank. You don’t need to argue- just perform!

Get some rest, you have a big day tomorrow.

 

[Frank Rizzo]

Sucks when accountability comes knocking, eh?

You talked a lot of **** and made a lot of claims over on Brads build thread, Frank. You don’t need to argue- just perform!

Get some rest, you have a big day tomorrow.

Lotta “yapping “ Trent ... I don’t go by talk my friend ... testing and video documentation and most importantly Results ! And yes, the 462c stratos will remain stock

 

[Stihl 041S]

Lotta “yapping “ Trent ... I don’t go by talk my friend ... testing and video documentation and most importantly Results ! And yes, the 462c stratos will remain stock

You say the Stratos will stay intact without any testing........

But answer all questions the other questions first.
That you avoid.

 

[wcorey]

3rd tank fuel on her so things need to “wear-in” a bit more I agree ... I don’t have another 462c lying around but I do have a hot-woods ported 362c ... This will just have to do

3rd tank of fuel on those three pieces of firewood... huh...???

 

[Stihl 041S]

3rd tank of fuel on those three pieces of firewood... huh...???

Wellll.......maybe he didn’t fill the tank ALL the way to the top..

 

[Deleted member 135597]

Wellll.......maybe he didn’t fill the tank ALL the way to the top..

Kinda like how the elevator doesn’t go all the way to the top

 

[Stihl 041S]

Kinda like how the elevator doesn’t go all the way to the top

Low hanging fruit. Lol. But yes