Bolt lengths and diameters for attaching aftermarket dogs?

[Denji]

Hi Guys,
Does anyone know what length and diameter bolts are needed to fit aftermarket felling dogs to an MS382? I can't find the info anywhere. Looks to be the same as an MS381 if that helps at all.

Also, does anyone know if 362 dogs are interchangeable with 382s?

Cheers!

 

[MagraAdam]

I'm 95% sure that the dogs are different and won't give you a straight cut when using the dogs to set the cut, and 99% Sure they all use the same screws and nuts (for the outer dogs) and any dealer should be able to get them for you.

 

[DND 9000]

Answered in your other thread.
https://www.arboristsite.com/community/threads/ms382-aftermarket-dogs-bolt-length.351128/
Spikes between MS 362 and MS 382 are not interchangeable.

 

[Denji]

I'm 95% sure that the dogs are different and won't give you a straight cut when using the dogs to set the cut, and 99% Sure they all use the same screws and nuts (for the outer dogs) and any dealer should be able to get them for you.

 

[Denji]

Thanks lads, that's very helpful. There's surprisingly little on this that I can find on the internet and my local Stihl dealer didn't know.

 

[MagraAdam]

You should grab the IPL for your saw

 

[Denji]

You should grab the IPL for your saw

That's an excellent idea, I'll do that. Thanks buddy