Broke my axe handle

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I hung this one today .
A 2$ yardsale Hults Bruks on a 1$ yardsale ash handle .

h3-bhaNw84zqYvJVI24w5_ajCLWtQCzMXh5-kGamHJw46T6GVqqiWuQRJxnVpGDMjFE7lx1dDB8NezbV1gqCPjDZF-Hab4EVf1hdFpN4nz6NP2daDHr1AJncMmxEmWEFOndj-bkyPQUPulcLxntHIvme2KkqnSPXPqJ4KDHXrB8QtPe1iYmLak4ZbkNcyh6nIuz6cE1kB3-bR60Wz7eNkL46HuzUDiC5AArkbxki4-c6QO8Uyvck7e4fsEJ0kmjfOwMepI9_xrvV3CS4-0l2Vc_jXfSUvewSW19dOJti1YQSh7Kj_C1SUOdaFtyJgyUO0zsEfDixVxhK9-P7yaTPpmyMdcIoknGCABqXn17Vb1Z6E4tdUtWKAn5AM7rw3kBsjiFVp5d2szUF0_QdFt21gDl94yhGfLayug9JE8y4aXloRKRs_PmkaiMW0V8RSQUP582t_aaKSrmHftoOJqV4N6NBSKfgJtbRZ6AXpvgVScwZnA-54S_EuvlxS-Vf_Bg8q3tLkwzZ5QoY70KyT01bh7Qa7R-QahZlKrDhMluDtc7YDnhSOhtBHsi2k-YOeMRhOuSEmiHHqx2j4UNopllq1shhuE-N706AVtJ1Qkv-ZKSIBfRaf7hsA9aio1nwEnMX_bMpporFFrltKVUGFq8hEkDiX4waQUjmIgZ-ZZFFXXw=w1000-no-tmp.jpg
 
After years of replaceing 10speed handles, I went to plastic. Plastic handles dont break, but they will work loose in the head. I remember almost 40 years ago, I worked with a guy that broke every hammer handle he picked up. He stood about 6'6" and driving spikes just wasnt his cup of tea. One day the boss brought in a whole box of fiberglass handled hammers. he handed the big guy one and told him "lets see you break that handle". Big guy took the hammer and wacked it about 3 or 4 times across the rail and shattered the handle and gave it back to the boss, boss man just stood there with his mouth open and shaking his head.

I dont use a axe enough to wear a handle out. When I do have to rehandle one, I like to warm up the axe head before driving in the handle. I"ll put the handle in as tight as I can and drive my wedges, when the axe head cools off, it grips the handle even tighter. I like to line my wedges up with the length of the axe head, instead of across the head. Dont know if it really makes any difference, but it seems like putting wedges across the head starts the handle splitting.
 
I dont use a axe enough to wear a handle out. When I do have to rehandle one, I like to warm up the axe head before driving in the handle. I"ll put the handle in as tight as I can and drive my wedges, when the axe head cools off, it grips the handle even tighter.

That is the purpose of the Linseed Oil. It makes it slippery for fitting, and as it is absorbed it expands the wood while preserving it, and doesn't dry out.

I like to line my wedges up with the length of the axe head, instead of across the head. Dont know if it really makes any difference, but it seems like putting wedges across the head starts the handle splitting.

The metal wedges are put in perpendicular to the length to push the front and back of the handle's checks into the axe head. I have one in diagonal because I didn't have a smaller one, and yes you don't want the metal wedge to get to close to the axe head and possibly splitting the wood (a first failure point).
 
Nice looking axe there. I like the vintage axe heads with a 28 straight hickory handle for banging wedges. I tried a Fiskars x27, didn't like the feel with the bottom of the handle flared out to a point. Split pretty good with head design and possibly a coating of some sort.

Sent from my XT1650 using Tapatalk
 
I had a coupon for Cabelas, and decided to drive to Coeur D'Alene, and dropped in to view axe handles at Home Depot. About a dozen 36" single bit handles, and not one had the grain running in the correct direction. One had the grain running diagonal, but was 2 tone with a darker shade of wood running most of the length and the grain wasn't tight. It's like all the rejects get sold as replacement handles.

My shiny red painted axe head isn't looking so hot any more. I haven't even started cutting firewood yet and the axe is already looking well used.
 
Nice looking axe there. I like the vintage axe heads with a 28 straight hickory handle for banging wedges. I tried a Fiskars x27, didn't like the feel with the bottom of the handle flared out to a point. Split pretty good with head design and possibly a coating of some sort.
Sent from my XT1650 using Tapatalk

Here's my 5lb Norlund Maine wedge that I hafted on a straight 38 hickory last weekend .

hnsV-5VEamglbziQxDibhCIAWrlw6ocmwq37JlbwrZFdkJ1Ta7edfrAfED_rD6gfmU_zw2AWB8f-dsvZh3TWSOCbOAphDM-80Gz7MKAevL0QR7_EsLw9M_bIgpG1HgbNZQHnFew94RdxiZqCYkTcZyQDdLMjeTcKEZyey4cDS0Z72AgYwDwaCKXuYgtXjjxurDSl38pWTl7Z17dVK-y0uIITfvrPws6ww-G-xOAPTRmkkZIBy50Od9B4O7w9fCyPEOqChQPDLKjZSfPYD6pL7KcD7gTefh7fFPT7LjueiwbDK07z5EMV5Uv-ZOxXv63qUFrzcEkVcBJpJ5A0vz90FRZywn-VkkBaW5-KwhHYdK8VgL-bdQ9c8zc-FHBVP23x5dkym1rRmk4UAc9He28oLfWLGkEWfZfCEF8X5R6M1arHCq35Im35yyJQZHiQuWAIk5PTkEk817hpo3mmYYedAW4Yc-7ACq-w5L2TmKD--7H23pH0TRVrYAOLdExDVdQvUGbKAigTroAD5vyKJdp6k1MsEnGmNWafX2G3PNUkVQ4YkJS0wZJOAFMic8d-eK0KHj6Bh64blX8XT-uDNF7x674AjRX_WSw-vcHUtOqk1wi39WYxWH58rQgubvQ5fWcuHo5yM4iNxNMlCK3JQTxXzh7-h_t3UHZ6wKY00rGUWok=w1000-no-tmp.jpg


Not tried it yet in the woodpile .


Very possible.

I know you can pay a little extra from House Handle Co and they will give you a select grade replacement which should have better grain.

The jury is out on that .

 
Very possible.

I know you can pay a little extra from House Handle Co and they will give you a select grade replacement which should have better grain.

I did check out the site, and it sounds good. Just not ready to buy such an item over the internet. I prefer to see, hold and evaluate the handle before the purchase.
 
I did check out the site, and it sounds good. Just not ready to buy such an item over the internet. I prefer to see, hold and evaluate the handle before the purchase.
I can agree with that. I haven't had much trouble finding handles locally although I will usually look at 20 or so of them before I pick one.

The folks on here who have purchased from House Handle have been very happy FWIW.
 
I think Beaver tooth makes some nice handles too. I also like to see what I am buying but figured I would take a chance on 1 handle and selected handpicked #1 grade, to my surprise I have received nice handles. I still buy them one at a time. I'm convinced " in my mind anyway" that ol Jr at the handle company is making minimum wage and really isn't that interested in picking out the best handles so one at a time for me when I can't see the handle I am buying.

Sent from my XT1650 using Tapatalk
 
Here's my 5lb Norlund Maine wedge that I hafted on a straight 38 hickory last weekend .

hnsV-5VEamglbziQxDibhCIAWrlw6ocmwq37JlbwrZFdkJ1Ta7edfrAfED_rD6gfmU_zw2AWB8f-dsvZh3TWSOCbOAphDM-80Gz7MKAevL0QR7_EsLw9M_bIgpG1HgbNZQHnFew94RdxiZqCYkTcZyQDdLMjeTcKEZyey4cDS0Z72AgYwDwaCKXuYgtXjjxurDSl38pWTl7Z17dVK-y0uIITfvrPws6ww-G-xOAPTRmkkZIBy50Od9B4O7w9fCyPEOqChQPDLKjZSfPYD6pL7KcD7gTefh7fFPT7LjueiwbDK07z5EMV5Uv-ZOxXv63qUFrzcEkVcBJpJ5A0vz90FRZywn-VkkBaW5-KwhHYdK8VgL-bdQ9c8zc-FHBVP23x5dkym1rRmk4UAc9He28oLfWLGkEWfZfCEF8X5R6M1arHCq35Im35yyJQZHiQuWAIk5PTkEk817hpo3mmYYedAW4Yc-7ACq-w5L2TmKD--7H23pH0TRVrYAOLdExDVdQvUGbKAigTroAD5vyKJdp6k1MsEnGmNWafX2G3PNUkVQ4YkJS0wZJOAFMic8d-eK0KHj6Bh64blX8XT-uDNF7x674AjRX_WSw-vcHUtOqk1wi39WYxWH58rQgubvQ5fWcuHo5yM4iNxNMlCK3JQTxXzh7-h_t3UHZ6wKY00rGUWok=w1000-no-tmp.jpg


Not tried it yet in the woodpile .




The jury is out on that .


Nice handle on the 5lber.
The video review makes me gun-shy of house handle. Guy said he paid for hand picked no.1 grade.

Sent from my XT1650 using Tapatalk
 

Latest posts

Back
Top