You can become a Supporting Member which comes with a decal or just click here to donate.
do you still have the .325 chain?
Where in Ohio?
to most of the state we are southeastern ohio but i guess not to you since you're in BFENow I see where your at, you said south ohio but your north of me. I'm in Glouster area. On the chains, I'm not that familiar with k1l is it low kick or regular? semi or full? Thanks
Used saws. shipped free on the east coast. paypal FF or add 3%
Echo CS400 18" with case. new chain on it and original but dull one included as well. only has a tank or 2 thru it. $200
Husqvarna 55. nice clean saw with a new OEM recoil and wrap handle on it. very low hours. $225
Husqvarna 142 $75
Stihl 029 $200
Dolmar PS-510 new saw but was left on a shelf in the shop for a couple years so somewhat dirty, wiped it off and left some scratches in the top cover $300
View attachment 622125 View attachment 622126 View attachment 622127 View attachment 622128 View attachment 622129 View attachment 622130 View attachment 622131 View attachment 622132
Used saws. shipped free on the east coast. paypal FF or add 3%
Echo CS400 18" with case. new chain on it and original but dull one included as well. only has a tank or 2 thru it. $200
Husqvarna 55. nice clean saw with a new OEM recoil and wrap handle on it. very low hours. $225
Husqvarna 142 $75
Stihl 029 $200
Dolmar PS-510 new saw but was left on a shelf in the shop for a couple years so somewhat dirty, wiped it off and left some scratches in the top cover $300
View attachment 622125 View attachment 622126 View attachment 622127 View attachment 622128 View attachment 622129 View attachment 622130 View attachment 622131 View attachment 622132
I fell in the same trap.....just couldnt let a nice red top get parted out when the only big piece it needed was a case half, didnt figure in all the small pieces parts it would need to bring it up to date. Had a chance to sell it last nite to a logger and i couldnt bring myself to do that either....hated the idea of a logger using it daily and possibly destroying it so i just made him a good deal on a new sawF me that red top is sexy and calling my name!
Dolmar 7900 red top. gone thru top to bottom, new PTO case half, both bearings, seals, piston ring, updated oil lines, fuel line, fuel filter, carb kit, upper A/V mount, added the limiter, almost new RSN bar with a used chain, air filter, impulse line, and plug
Makita 6401. gone thru top to bottom, new 7900 P&C, updated oil lines, clutch drum, oil pump rebuilt, upper A/V spring, added the A/V travel limiter, new Carb, impulse line, fuel filter, and plug
$525 plus shipping paypal FF.
@Dahmer
View attachment 626196 View attachment 626197 View attachment 626198 View attachment 626199
I fell in the same trap.....just couldnt let a nice red top get parted out when the only big piece it needed was a case half, didnt figure in all the small pieces parts it would need to bring it up to date. Had a chance to sell it last nite to a logger and i couldnt bring myself to do that either....hated the idea of a logger using it daily and possibly destroying it so i just made him a good deal on a new saw
Dolmar 7900 red top. gone thru top to bottom, new PTO case half, both bearings, seals, piston ring, updated oil lines, fuel line, fuel filter, carb kit, upper A/V mount, added the limiter, almost new RSN bar with a used chain, air filter, impulse line, and plug
Makita 6401. gone thru top to bottom, new 7900 P&C, updated oil lines, clutch drum, oil pump rebuilt, upper A/V spring, added the A/V travel limiter, new Carb, impulse line, fuel filter, and plug
$525 plus shipping paypal FF.
@Dahmer
View attachment 626196 View attachment 626197 View attachment 626198 View attachment 626199
Enter your email address to join: