Want to Sell chainsaw bars with pictures now $7 each must buy all

[rupedoggy]

I have now pictures some of the bars for sale for $10 each. I will send these but the shipping will be extra. The $10 price is for the bars if you buy all of them. Take a look and see. The longest bar is 44 inches and there are a lot of 36 and down to 28. The ones pictured on the wall are most of the small bars and several are stacked over one another. There are over 170 bars in this collection. Chains as you want will be included. These are used chains for the most part. Mike

 

[Johnmn]

What are your winsor speed tip bars for mount and size? Also interested in the total bar!

 

[rupedoggy]

I don't know at this time but blow up the thumbnail and you can figure it out. Remember this is an all or nothing sale. Mike

 

[r black]

good price... If you start to piece them out ill take some.... at a greater price of course ...shipping bars is costly ...

 

[Rosss]

Longest bar for a large mount Husqvarna?

 

[rupedoggy]

I don't think so on that one. That bar is old and it seems like I remember it fits an old Mc or Homie. You have to know that the bars are at one location and I am at another, two and a half hours apart. Mike

 

[rupedoggy]

I read your question again and now see it may mean "what is the longest bar you have for a Husky"
The answer to that would be 36 or 37 inch. This is usable length not full or overall length. Mike

 

[Rosss]

I read your question again and now see it may mean "what is the longest bar you have for a Husky"
The answer to that would be 36 or 37 inch. This is usable length not full or overall length. Mike

Thank you for answering.
After I posted I reread the thread and realized you were looking to sell all the bars as a lot. I was too excited that somone might have a 40" plus bar that would fit a husqvarna for sale to read it right. I wasn't expecting to get one for $10 plus shipping but hopeful of something reasonable.
I have a 36" bar on the saw now but have a logs that are 36' and 38" to mill and can't find a bar over 42" that is not very either very expensive or very long. Ideally looking for a 48"-50"

 

[rupedoggy]

The bars are now $9 each if you buy all.

 

[woodfarmer]

No where in the add does it say that these are a lot!

 

[Stihl 041S]

No where in the add does it say that these are a lot!

First post......
It was $10 if you buy them all......now $9

 

[Overkill338]

Do you have a 0.050 in 14" & 16" that would fit a Stihl MS170, 180,210,211 etc etc? Also the 3/8 LP 50 gauge chain for those length bars.

One more also, we need an 18" chain for the Husqvarna 445. .325 pitch, 50 gauge.

 

[Ryan'smilling]

Do you have a 0.050 in 14" & 16" that would fit a Stihl MS170, 180,210,211 etc etc? Also the 3/8 LP 50 gauge chain for those length bars.

One more also, we need an 18" chain for the Husqvarna 445. .325 pitch, 50 gauge.

He's selling all 170 bars as a package deal.

 

[rupedoggy]

Amazing

 

[Overkill338]

He's selling all 170 bars as a package deal.

Thanks. I guess my tired eyes missed that part.

 

[Stihlcuttingwood]

I have now pictures some of the bars for sale for $10 each. I will send these but the shipping will be extra. The $10 price is for the bars if you buy all of them. Take a look and see. The longest bar is 44 inches and there are a lot of 36 and down to 28. The ones pictured on the wall are most of the small bars and several are stacked over one another. There are over 170 bars in this collection. Chains as you want will be included. These are used chains for the most part. Mike
View attachment 623631 View attachment 623632 View attachment 623633 View attachment 623634 View attachment 623635 View attachment 623636 View attachment 623637 View attachment 623638 View attachment 623639 View attachment 623640

 

[Stihlcuttingwood]

Do you have 20 inch stihl bar 3/8 pitch

I have now pictures some of the bars for sale for $10 each. I will send these but the shipping will be extra. The $10 price is for the bars if you buy all of them. Take a look and see. The longest bar is 44 inches and there are a lot of 36 and down to 28. The ones pictured on the wall are most of the small bars and several are stacked over one another. There are over 170 bars in this collection. Chains as you want will be included. These are used chains for the most part. Mike
View attachment 623631 View attachment 623632 View attachment 623633 View attachment 623634 View attachment 623635 View attachment 623636 View attachment 623637 View attachment 623638 View attachment 623639 View attachment 623640

 

[Stihl 041S]

Do you have 20 inch stihl bar 3/8 pitch

And there is a choice of 3 different gauges and 3 different mounts.......1 in 9 chance of hitting it

Though I never saw a 3002 mount 043 bar.

But when you buy the lot of 170 bars......a very good chance there is what you want

 

[Stihlcuttingwood]

And there is a choice of 3 different gauges and 3 different mounts.......1 in 9 chance of hitting it

Though I never saw a 3002 mount 043 bar.

But when you buy the lot of 170 bars......a very good chance there is what you want

So what I got is I bought an 036 stihl I want to harness it with a twenty inch bar 3/8 pitch. What price do you have or don't you have any I don't need a 170 bars. 4 saws and 170 bars that would be out of question

 

[Stihl 041S]

So what I got is I bought an 036 stihl I want to harness it with a twenty inch bar 3/8 pitch. What price do you have or don't you have any I don't need a 170 bars. 4 saws and 170 bars that would be out of question

I don’t have a price.
Half this thread has been folks wanting a bar or three..."....

My post was tongue in cheek because the seller wants to sell them in a lot.

But people keep asking for singles...........