I have three Echo chainsaws; two are fairly new (CS-490) and one I bought off a friend that's probably 10 yrs old. All three work fine.
However, I 'm wondering how often you should replace chains?
I use a Stihl chain sharpener after each use of the chainsaw. Two of the saws weren't cutting that great (after I sharpened them) and the chains were about a year old. I do hit dirt on occasion since I'm felling trees and try to get the stump down low.
I had two new chains so replaced the two that weren't cutting well.
I'm wondering if I my sharpening skills need improving or chains just need replacing?
I have worked on saws for 30 yrs.....and learn everyday from this forum. I'm not alone in my hobby. In My Honest Opinion : ECHO's are great saws. The 490 runs right up there with a Stihl MS250 or Husqvarna 455. they have been on the market for over 10 yrs.... as is your 3rd machine. What is it?
Sharpening chains isn't rocket science, but it is more common these days, with Woodsman. Chains (and files) have increased in quality, and the homeowner wants the best, once.
Free-hand grinding is useless. Its the fastest, easiest way, to mess up a perfectly serviceable chain. Serviceable meaning 6 - 8 filings / 2-3 yrs. before discard. No disrespect to the Dremel and its $10 stones..........if your Stihl gizmo is electric.......
Once a couple of teeth are mis-ground, and the "green" safety rakers not shortened in a jig......the chain is great for that digging in the garden you admit to. HA! The local mower shops all charge 5 - 7bucks....I suppose that will explode on this forum.
Again, this is all just my thoughts. Perhaps you are hand filing, with one of those file holder things. Even if its the orange Stihl holder....Just put 1 of the old chains on the saw/bar, and practice. Spend a few hours learning your technique. Files wear down as fast as they are used......And certainly use/measure with a gauge. You may become just as good as lumberman who does so, at lunchtime.
Chains sell in 3 levels. For my money, Oregon makes a nice Full - Semi - Chisel chain.
The Archer chains are common now, and I have enjoyed their mid-level prices. ARCHER is from Australia.
The chinesium products, 8TENse, Farner ted, etc.....are only good for a day or 2 in the Woods, where you are working with your saws, all day. That frequency of chainsaw work justifies better chains, premuim fuel mix, tacky bar oil, and daily cleaning. If you want the best, this forum will provide the rest.