jacrawley
ArboristSite Member
I have a dcs540 that hasn't run well in a long time so I did a carb rebuild yesterday to little effect.
It idles very poorly to not at all with the idle screw all the way in and the l screw pretty far out. It runs rich in the cut with the h screw all the way tight. This is contrary to my past experience with carbs.
It has the walbro wt carb. Any ideas would be very appreciated.
It idles very poorly to not at all with the idle screw all the way in and the l screw pretty far out. It runs rich in the cut with the h screw all the way tight. This is contrary to my past experience with carbs.
It has the walbro wt carb. Any ideas would be very appreciated.