powerking
ArboristSite Guru
...Ok bear with me..this was my first time with the wheel..These are the numbers I came up with on my 028, keep in mind, this was a used jug and the only port work that I did to it was, widen the exhasut port and flatten out the intake floor, transfers were untouched, the base gasket was removed and squish is at .023. the wheel i used was the one that I printed off of one of the posts.
Do these numbers look ok? The issue I was having was no bottom end torque. My compression is 165 cold
Ex open 112*
Dur 136*
In Open 117*
Dur 126*
Tr open 125*
Dur 110*
Do these numbers look ok? The issue I was having was no bottom end torque. My compression is 165 cold
Ex open 112*
Dur 136*
In Open 117*
Dur 126*
Tr open 125*
Dur 110*