took the pencle boxx off my bota in just a week after delivery. Made a pair of brackets and mounted a real tool box in its place.
Big 2 pound hammer for driving wedges in cuts, 4 wedges, a pipe wrench I use rather than fight with the 3 link adjustment, two 15 inch cresent wrenches (never know when you want to remove a spark plug on a poulan chain saw.)
a grab hook or a quick hitch hook depending on the mounted tool, a quart of bar oil a couple of spare saw chains, ratchet strap, Can't remember why I put that in there. and misc. pin shims and snap pins, and a gallon of saw mix.
Also mounted two J hooks I can put the hitch draw bar on when not in use
Yes there is seat clearance too.
Last mod I did was make mount for sledge hammer, log timber jack, the Husky splitting Maul double bit axe and misc. things with short handles that will fit in the 2" tube.
In the planing stage is logging chain tool holder in the lower loader frame, the hole behind the front tire.
Tired of fighting those turn buckles to hook up a three point tool I got a quick hitch.
Needed a place to carry some chain saws. I made 2 ROMP'S, carriers.took about a hour to make and install from scrap wood.
I have a pair of new ones in the works if I ever get another spare moment.
Al
