Cannon51
ArboristSite Operative
My BIL brought his nearly new Stihl FS94r trimmer to see if I could get it running. He had taken the carburetor apart so I'm wondering if the fuel lines are on correctly. I got it to run for a few seconds but after it died it is dripping gas out the air filter housing. The only time I ever had this happen was when I had reversed the lines on the primer bulb. I took the filter line out of the tank and removed the filter, I put the line in a cap full of gas and pumped the primer. No gas was pulled through the line. I removed the black line at the end of the screwdriver from the carb and put it in the gas. When I pumped the bulb it did pull gas out of the cap. Is the bulb plumbed correctly? The line from the gas filter is connected on the other side of the carb, Should the gas be pulled through the carb, to the bulb and returned to the tank through the green line? I can't find much on the web about this trimmer.
Cannon
Cannon